Cypress Semiconductor CY4501 CCG1 DVK Посібник із швидкого старту - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мікроконтролери Cypress Semiconductor CY4501 CCG1 DVK. Cypress Semiconductor CY4501 CCG1 DVK 4 сторінки.
Друкувати сторінку
Step 4: Verify jumper settings on the CCG1 EMCA board.
J3, Controls Disconnection of
VCONN Ra Resistor
for J1 Type-C Connector
1-2 Short: U1 (Near End CCG1)
Controls Disconnection (Default Setting)
2-3 Short: U2 (Far End CCG1)
Controls Disconnection
J6, U1 VDD Power Selection
1-2 Short: U1's VDD Connects to
VCONN_COM (Default Setting)
2-3 Short: U1's VDD Connects to J1's
(Type-C Connector) VCONN
Step 5: Connect one end of the EMCA board to the Host board and its other end to the Client board.
Plug a USB drive (not provided with the kit) into the Client board. Verify your setup as shown
in the picture below. To evaluate SuperSpeed USB data transfers, it is recommended to use
a SuperSpeed USB ash drive.
QUICK START GUIDE
USB SS
Type-A to
Type-B Cable
CCG1 Host Board
J2, Controls Disconnection of
VCONN Ra Resistor for J14
Type-C Connector
1-2 Short: U2 (Near End CCG1)
Controls Disconnection
2-3 Short: U1 (Far End CCG1)
Controls Disconnection
(Default Setting)
J7, U2 VDD Power Selection.
1-2 Short: U2's VDD Connects
to VCONN_COM
2-3 Short: U2's VDD Connects to
J14's (Type-C Connector VCONN)
Open: Default Setting
CCG1
CCG1
Client Board
EMCA Board
5 V Power
(Mini USB Cable)
USB Flash Drive