Cypress Semiconductor CapSense Express CY3218-CAPEXP2 Посібник із швидкого старту - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Материнська плата Cypress Semiconductor CapSense Express CY3218-CAPEXP2. Cypress Semiconductor CapSense Express CY3218-CAPEXP2 20 сторінок. Evaluation kit
Друкувати сторінку
3. Install Software
Install PSoC Express Development Software
3.1. Insert the Kit CD, wait for the installer to start, and install the following software in the order
listed:
a.
Install PSoC Programmer.
b.
Install .NET Framework 2.0.
c.
Install PSoC Express 3.
d.
Install CapSense Express Extension Pack.
e.
Install CapSense Express Kit Documentation.
4. CY3218-CAPEXP2 Board Features
One 5-Segment CapSense
■
Slider
4 Status LEDs (Green)
■
1 Power LED (Red)
■
1 Mechanical Switch
■
2
I
C Header
■
AAA Battery Holder
■
Use the CY3218-CAPEXP2 Evaluation Kit to evaluate the CapSense slider, LED drive, digital
input, and I2C features of the CapSense Express device. Via the CapSense Express Configura-
tion Tool in PSoC Express, the four status LEDs can be controlled by the CapSense slider and
the mechanical button. The CapSense Express device mounted on the board is in the 16-QFN
package. The board is powered with a AAA battery mounted in the battery holder. A boost con-
verter converts the input voltage in the range of 0.9V-1.5V to the device operating voltage of
3.3V. The board can also be powered using an I2C to USB bridge connected to the I2C header.
Status LEDs
CapSense Slider
Mechanical Button
Top of Board
Page 3