AERMEC WLRC40 Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Панель керування AERMEC WLRC40. AERMEC WLRC40 20 сторінок.

WARNING:

• the battery charge level is shown on the

remote control. When the "

replace the batteries as otherwise the remote

control cannot work properly.

INTELLIGENT

NB:

• remove the batteries if the remote control is

not used for a long time.

• The remote control can emit a signal up to a

maximum distance of 8 metres.

• The unit can be affected by signals

HOUR ON OFF

transmitted by the remote control units of

televisions, video recorders, or other devices

used in the same room.

REPLACING THE REMOTE CONTROL BATTERIES

ON/OFF

To replace the batteries of the infrared remote control,

proceed as follows:

1. Open the battery cover by sliding it in the direction

of the arrow.

2. Take out the old batteries

3. Insert new alkaline high-performance LR03 (AAA)

1.5V (penlight) batteries, being careful not to invert

the polarity.

4. Close the battery cover.

Cool

Fan

Mode

T-ON

Clock

X-Fan

Light

Sleep

" icon flashes,

WIFI

Heat

I Feel

T-OFF

Temp

Wifi