Cyrus 6 Power Інструкція користувача

Переглянути онлайн або завантажити pdf Інструкція користувача для Підсилювач Cyrus 6 Power. Cyrus 6 Power 5 сторінок.

Друкувати сторінку

Cyrus 6 Power, 8 Power & X Power

IMPORTANT! Read before operating this equipment!

CAUTION: The exclamation mark is to draw your attention

to important instructions and safety procedures in this

manual.

ATTENTION: The lightning flash warns you of the risk of

electrical shock presented by components inside this

product. Unauthorised personnel must not open this unit

WARNING: To reduce the risk of electrical shock do not remove any unit

covers or panels. There are no user serviceable parts in this product.

WARNING: To reduce the risk of electric shock, do not expose this

equipment to rain or moisture.

HEED WARNINGS: All warnings on the product and in the operating

instructions should be adhered to.

READ ALL THE INSTRUCTIONS: All the safety and operating instructions

should be read before the product is operated.

RETAIN INSTRUCTIONS: The safety and operating instructions should be

retained for future reference.

FOLLOW INSTRUCTIONS: All operating and use instructions should be

followed.

CLEANING: Unplug this product from the mains before cleaning. Do not use

liquid or aerosol cleaners. Use a damp cloth for cleaning.

WATER AND MOISTURE: Do not use this product near water - for example,

near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement;

or near a swimming pool and the like. The product must not be exposed to

dripping or splashing and no objects filled with liquids, such as vases, shall be

placed on the product.

HEAT: The product should be situated away from heat sources such as

radiators, stoves, or any other products (including amplifiers) that produce

heat.

VENTILATION: Slots and openings in the cabinet are provided for ventilation,

to ensure reliable operation of the product and to protect it from overheating

and these openings must not be blocked or covered. The openings should

never be blocked by placing the product on a bed, sofa, rug or similar surface.

This product should not be placed in a built-in installation such as a bookcase

or rack unless proper ventilation is provided or the manufacturer's instructions

have been adhered to.

OBJECT OR LIQUID ENTRY: Never push objects of any kind into this

product through openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric shock.

ACCESSORIES: Do not place this product on an unstable cart, stand, tripod,

bracket, or table. The product may fall, causing serious injury to a child or

adult, and serious damage to the product. Use only with a cart, stand, tripod,

bracket or table recommended by the manufacturer, or sold with the product.

Any mounting of the product should follow the manufacturer's instructions,

and should use a mounting accessory recommended by the manufacturer.

ATTACHMENTS: Do not use attachments not recommended by the product

manufacturer as they may cause hazards.

MOVING THE PRODUCT: A product and cart

combination should be moved with care. Sudden stops,

excessive force, and uneven surfaces may cause the

product and cart to overturn.

POWER SOURCES: This product should be operated only from the type of

power source indicated on the marking label. If you are not sure of the type of

power supply to your home, consult your product dealer or local power

company. For products intended to operate from battery power, or other

sources, refer to the operating instructions.

OVERLOADING Never overload wall outlets, extension cords, or integral

convenience receptacles. This can result in an increased risk of fire or electric

shock.

POWER CORD PROTECTION: Power supply cords should be routed so that

they are not likely to be walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs, convenience receptacles,

and the point where they exit from the product.

NAKED FLAMES: No naked flame sources, such as candles, must be placed

on this product.

LIGHTNING: For added protection for this product during a lightning storm, or

when it is left unattended or unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line surges.

CAUTION! POLARISED CONNECTOR (CANADA and USA): To prevent

electrical shock, match wide blade of plug to wide slot, fully insert. Do not

alter or remove this plug if it does not fit your mains power socket. Have a

suitable socket installed by a competent electrician.

POWER SUPPLY:

Connect the moulded IEC connector of the AC cord supplied plugs into the

power inlet

next to the power switch. It must only be replaced as follows:

X Power

8 Power, 6 Power U.K. / Europe 230V .... T1AL/250V 20mm

8 Power

The mains supply requirement for your Cyrus 6/8/X Power is marked on a

label on the rear panel. Before connecting, check that this voltage is the same

as your mains supply.

If you move to an area with a different mains voltage, contact your local Cyrus

distributor to have your product converted.

NOTE FOR UK CUSTOMERS:

The 6/8/X Power is supplied with a power cable terminated by a fused 13A

mains plug. This plug should not be removed but if it is removed, dispose of it

safely and do not re-use it. To connect a new 13A plug, proceed as follows:

Connect the brown wire to the terminal marked L or coloured red. Connect

the blue wire to the terminal marked N or coloured black. The internal plug

fuse should be 5A.

SERVICING

Do not attempt to service this product yourself as opening or removing covers

may expose you to dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

CONDITIONS REQUIRING SERVICE: Unplug this product from the wall

outlet and refer servicing to qualified service personnel when:

•

REPLACEMENT PARTS: When replacement parts are required, be sure the

service technician has used replacements specified by the manufacturer or

have the same characteristics as the original part. Unauthorised substitutions

may result in fire, electric shock, or other hazards.

SAFETY CHECK: Upon completion of any service or repairs to this product,

ask the service technician to perform safety checks to determine that the

product is in proper operating condition.

PRODUCT SERVICE CENTRES

For product service or technical advice, contact only authorised Cyrus service

centres. The Cyrus distributors are listed at the end of this instruction manual

on the rear of the unit. The mains fuse

U.K. / Europe 230V .... T2AL/250V 20mm

N. America 115V ........ T3.15AL/250V 20mm

N. America 115V ........ T1.6AL/250V 20mm

230V Products:

Voltage Range

115V Products:

Voltage Range

When the power supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into the product.

If the product has been exposed to rain or water.

If the product has been dropped or damaged in any way.

If the product does not operate normally by following the operating

instructions. (Adjust only those controls that are covered by the

operating instructions. Improper adjustment of other controls may

result in damage requiring extensive work by a qualified technician

to restore the product to its normal operation).

When the product exhibits a distinct change in performance.

User Instructions

is on the rear panel

220V-240V

110V-120V