Cyrus CLASSIC POWER Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Cyrus CLASSIC POWER. Cyrus CLASSIC POWER 14 сторінок.
Друкувати сторінкуDaisy chain output
Bi-amplification
If your pre-amplifier only has a single set of pre outputs,
the Chain output can be used to connect additional Cyrus
power amplifers to each channel for bi/tri-amping. Such a
bi-amplified system provides the sonic benefits of totally
seperate power amplification for the bass and treble units
of the loudspeakers.
Note: to set up bi-amplification, the loudspeakers must have
bi-wirable terminals to enable seperate connection the bass
and treble units.
Note: the Chain output is operational whether the
unbalanced (RCA) or balance (XLR) input connection is
made to the Classic POWER.
Gain matching
All Cyrus power amplifier and all power amplifier stages in
Cyrus integrated amplifiers have all the same voltage gain
characteristics. This means you can use the Classic POWER
in conjunction with any Cyrus amplifier for bi-amping, etc.
without any set-up adjustments being required.
MC-BUS System & 12V trigger
Connecting the MC-BUS sockets in an MC-BUS system
provides unified system control.
An MC-BUS loop is established by connecting single phono
cables from the MC-BUS output of one unit to the MC-BUS
input of another in a daisy-chain. Complete the loop by
returning the MC-BUS output of the final component to the
MC-BUS input of the first.
With MC-BUS connection established you can control the
power function of the entire system from the front panel or
remote control of the main Cyrus amplifier.
Cyrus amplifier
MC-BUS out
MC-BUS in
Cyrus CD player
MC-BUS out
MC-BUS in
Cyrus streamer
MC-BUS out
MC-BUS in
Cyrus ower mplifier
p
a
MC-BUS out
MC-BUS in
Classic POWER
Connecting to a 12V trigger equipped system
The Classic POWER also includes a 12V trigger input for
Home Cinema, multi-room and other non-Cyrus systems
that use a 12V trigger signal to switch components to and
from Standby.
A 3.5mm jack cable will be required to set up 12V trigger
operation. These are available in standard lengths or can be
made up to a custom length.
Once the cable is available, connect it between the 12V
Trigger input on the back of the Classic POWER and a 12V
trigger output on the Home Cinema receiver or other
component that is controlling system power.
Home Cinema receiver
12V trigger output
Classic POWER
12V trigger input
7
User Instructions