Cyrus CD i Інструкція користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція користувача для Стереосистема Cyrus CD i. Cyrus CD i 18 сторінок. Hi-fi
Також для Cyrus CD i: Інструкція користувача (15 сторінок)

Друкувати сторінку
Cyrus CD i

Program Memory Storage

The CD i has two program modes – Program and Exclude.
Program sets the CD i to play the sequence of tracks you
like, Exclude sets the CD i to skip the tracks you don't like.
To set the CD i to Program or Exclude a selection of tracks,
follow this sequence-
1.
Load a disc.
2.
Press the MEMORY STORE key on the remote control
once to set Program mode (the display will read 'Enter
Tracks') or twice to set Exclude mode (the display will
read 'Skip Tracks').
3.
Enter the sequence of tracks to be stored (or skipped)
with the remote control numeric keypad. A maximum
of 30 tracks may be stored in the program memory. If
an error is made in the programming sequence, pressing
the STOP/EJECT key will cancel the last entry.
4.
When all the tracks have been stored, press the MEMORY
key again (the display will now read 'Program Ready'.
5.
Press play to begin playing the tracks in the programmed
sequence.
NOTe:
1.
'MEMORY FULL' indication will show on the display
when the program stored exceeds 30 tracks or a stored
program time of 100 minutes or greater.
2.
When engaging STOP while a program is stored, an extra
press is needed to clear the memory. Thus:
•
Press STOP/EJECT once to stop the disc.
•
Press STOP/EJECT a second time to clear the
memory.
•
Press STOP/EJECT a third time to eject the CD.
•
One continuous press will accomplish all operations.

front panel display

a
5
Reading...

Key to the Front Panel Display drawing:

1.
Track Display (Two Digit)
Track number, disc reading and error display.
2.
Mode Indicator
Indicates the current operation mode (play, pause etc.)
3.
Time Display
When the disc is stopped this indicates the total time.
When the disc is playing, either elapsed time for the
current track or
time remaining to the end of the disc will be shown.
4.
Repeat Indicator
This symbol indicates that repeat is set.
5.
Memory Display
Indicates when a program is stored in the memory.
6.
Text display area
For status messages.
7
User Instructions
c
b
3:25
d
-10:15
e
3:25
f
3:25
g