Cyrus DAC X+ Інструкція користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція користувача для Конвертер мультимедіа Cyrus DAC X+. Cyrus DAC X+ 17 сторінок.
Друкувати сторінку- 1. IMPORTANT! Read before Operating this Equipment
- 2. Power Supply
- 3. Product Service Centres
- 4. User Instructions
- 5. Preparations for Installation
- 6. Model Differences and Upgrades
- 7. User Instruction
- 8. Restoring Factory Settings
- 9. Selecting an Input
- 10. Remote Control Operation
- 11. Troubleshooting Guide
- 12. Warranty
- 13. Audio Performance
Cyrus DAC XP+
External Regulated Power Supply - PSX-R
The PSX-R is a unique DC power supply which will upgrade the sonic
performance of your DAC XP+ and other Cyrus products. When a DAC XP+ /
PSX-R combination is installed, the analogue section of the DAC stage is
powered from this clean, stable power source while other requirements are
supplied internally. This ensures complete isolation of the sensitive analogue
sections reducing AC mains-borne noise and power supply ripple.
To connect the PSX-R to the DAC XP+, plug the connector on the umbilical
cord of the PSX-R into the Multi-Pole socket on the rear of the DAC XP+ 1!.
You will need a mains supply for both units.
NOTE: Connection of a PSX-R is detected automatically, so no internal
adjustments are required.
MC-BUS Connections
MC-BUS operation
Connecting the MC-BUS sockets c of the DAC XP+ in an MC-BUS system
provides unified system power control. With MC-BUS connections established
the power function of all connected Cyrus components may be controlled from
the DAC XP+ front panel or remote control. Refer to the following table for
Cyrus components that will be activated by the DAC XP+ when the inputs
have been named as listed -
Input name
Power on response
CD
CD players, power amplifiers
TUNER
Tuners, power amplifiers
AV
DVD players, power amplifiers
CYRUS AV
DVD players, surround decoders, power amplifiers
DVD
DVD players, power amplifiers
Follow the instructions in section 'Setting up the DAC XP+' to set the listed
input names.
All connected components will also set to Standby when the DAC XP+ is set
to Standby.
MC-BUS connection
An MC-BUS loop is established by connecting single phono cables from the
MC-BUS output of one unit to the MC-BUS input of another. Complete the
loop by returning the MC-BUS output of the final component to the MC-BUS
input of the first. The drawing in Fig 3 shows an example of MC-BUS wiring
for a Cyrus DAC XP+ with a CD player, tuner and power amplifier.
7
User Instructions