Cytech KP04AE Посібник - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник для Клавіатура Cytech KP04AE. Cytech KP04AE 12 сторінок.
Також для Cytech KP04AE: Інструкція (3 сторінок)
Друкувати сторінкуSpecifications
• Dim: 89 x 160 x 31 mm. Carton 92 x165 x45 mm
• Weight: 177 g
• 2 Lines by 16 character LCD. adjustable backlight.
• Power Supply: 12V DC from CM9001-EMS
• Current Consumption: 50 mA idle (No voice)
• Speaker for announcements
• Up to 15 Keypads (KP04, KP05, KP06/, KT05)
• Sensor Display Resolution: 0.1 deg c
• KP04AET Temperature Sensor 0 to 45 deg C,
Accuracy 1 deg C
System Requirements
KP04AE/KP04AET EMS sensor dislay mode works
•
with CM9001-EMS firmware 7.153 & above
Contents
KP04AE or KP04AET keypad
•
2 wall plugs and screws for mounting.
•
3 x 2 way removable terminal blocks
•
Connections to Comfort
JP1 – 12V/COM Connected to 12V/COM (Comfort)
•
JP2 – KA/KB. Connected to KA/KB (Comfort.)
•
JP3 – VOICE/MIC Connected to KP VOICE/MIC
•
(CM9001)
LEDs on PCB
D15 (Red) - RS485 reply to poll.
•
D16 (Green) - RS485 Poll by Comfort
•
Both D15 and D16 should be blinking when
communicating wth Comfort.
Cables
Shielded twisted 4-pair cable advised for wiring
between Comfort and keypads to avoid interference
from mains wiring and electrical appliances to
Microphone signals.
Jumper Settings
None - all settings using Setup (Pres/Hold * Key)