EG Athens 250 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Велосипед EG Athens 250. EG Athens 250 8 сторінок.

Electric Motor and Battery Features

High efficiency and power saving Electric Motor–

 A Brushless Motor with gears

 High efficiency of up to 85%.

 Efficiency>80%. 36V battery for a continuous run range of more than 40 miles on a single

charge in pedal assist mode.

 Produces a continuous and sustained power of 250 Watt power with a peak of up to 500

Watts.

High power and high torque –

 Fast pick up even under heavy load. Easily climb and ascend sloppy terrains.

 Low power consumption, Long-battery life and a Compact design.

 The 36 Volt Battery pack weighs 8 Lbs.

Trouble-free, Low maintenance, Long life span and Easy to maintain electric motor –

 High Quality Brushless Electric Disc motor with an advance speed sensor and gears.

 Closed system motor requires only surface cleaning and dry storage.

 Connect the battery to the charger; ensure the output terminal of the charger and the input

terminal of the battery are firmly connected.

 When the charger is plugged into a wall outlet, the charger LED indicator will turn RED to

indicate that the battery is charging

 The LED indicator on the charger will turn GREEN when the battery is fully charged.

 Disconnect the charger from the wall outlet before disconnecting the charger from the battery.

 To ensure long battery life, fully charge the battery for at least twelve (12) hours during the first

initial three charges and charge the battery at least once for 2-3 hours every 2 months

 ! NOTE: Only charge the battery pack using the supplied charger.

 ! NOTE: Always plug the charger onto the Battery pack before plugging the charger to the wall

socket.

 ! WARNING: Do NOT charge the battery for more than 24hrs for risk of damaging the battery.

！WARNING:

 Inspect the bicycle frequently. Failure to inspect the bicycle and to make repairs or

adjustments, as necessary, can result in injury to the rider or to others. Make sure all parts are

correctly assembled and adjusted as written in the owner's manual.

 Immediately replace any damaged, missing, or worn parts.

 Make sure all fasteners are correctly tightened as written in the owner's manual

 Parts that are not properly tightened can be lost or operate poorly.

 Do not over tighten parts, as over-tightening may damage the part.

 Make sure any replacement fasteners are of the correct type and size.

 Your bike uses an Aluminum Alloy frame. Ensure that the bicycle frame is carefully and

frequently inspected; as Aluminum frames can develop micro fractures from stress, severe

impact and shocks. If you see these micro fractures or cracks, stop riding the bicycle

immediately.

 In case of micro fractures, have the bicycle frame repaired and inspected by a qualified