EG Maui 500MX Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Велосипед EG Maui 500MX. EG Maui 500MX 9 сторінок.

 Depress the thumb throttle in any increments of power you desire to power the motor of the

bicycle and it will take off as demanded.

 This mode can be used in conjunction with any of the above modes as the amount of motor

power supplied while twisting the thumb throttle overrides all PAS modes the system is set

to.

 You can engage this mode whenever you want as long as the system is turned "ON".

 While peddling will lighten the motor load and assist lower the demand on the electric

motor, you do not need to pedal in this mode of operation.

 ! CAUTION: This mode is designed to achieve a speed of 20 MPH. User discretion is

advised

 The motor will NOT stop when you stop peddling while the thumb throttle is engaged.

 The motor will stop if the brake lever is depressed even if the thumb throttle is engaged.

 ! CAUTION: Remember to let go of the thumb throttle when getting on or off the bike

weather or not the brake levers are engaged.

 In this mode, the electric bike will use the most amount of battery power it will use the most

amount of battery power compared to any PAS modes on this bike.

 This mode will give you the least "miles per charge" compared to any of the above modes

of operation

 To assist the motor from a dead stop in this mode, it is suggested to gear down to lower

gears before stopping your bike.

About the Brake Safety Feature on all EG Electric Bikes

 ALL our electric bikes make use of a wired brake lever kill switch for safety purposes. When

the brake lever is engaged, it sends a kill signal to the controller to disable the motor under

all circumstances and condition. This will ensure the motor does not continue to spin when

you need the bicycle to stop.

 Pressing "Power/M" button turns ON the electrical system to your bike.

 Pressing and releasing "Power/M" button once the system is ON toggle between Odo =

Odometer, Trip = Tripmeter, Max = Max speed, AVG = Average Speed and Time = Total time

since last reset

 Pressing and holding "Power/M" button for 3 seconds will turn OFF the system

 Pressing "+" or "-" adjusts the PAS mode to the desired levels as indicated to the right of the

display.

 Pressing and holding "LAMP" button for 3 seconds cycles through Auto (A) or ON/OFF the

LED Head and Tail lamp. When it's dark out the light will come on automatically, when you

press this button it will turn the lights OFF. OR when it's daylight out, pressing this button will

turn the lights ON

 Pressing and holding "Walk assist" button will engage the walk assist. The motor will keep

turning as long as the button is held down.

 Pressing and holding "-" button while on Max Speed, AVG or Trip will zero out the meter.