EG Milan Додаток до посібника користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Додаток до посібника користувача для Велосипед EG Milan. EG Milan 8 сторінок.

 The motor will stop when you stop peddling in this mode.

 When first switched "ON" the motor starts off in the "LOW" power mode.

 In this mode the motor is very power efficient, and will assist you with the least power as

you peddle.

 In "LOW" mode, the system provides you with the most "miles per charge" of battery power

use among the peddle assist modes.

2b. Peddle Assist Mode (Medium) –

 To put the bike in "Medium" peddle assist mode, switch on the bike as you would on the

above "LOW" mode and then press the green "Mode" button to light up the "MED" mode

and peddle the bicycle normally as you would any bicycle.

 In this mode, the motor will assist you with a moderate amount of power as you peddle the

bicycle.

 The motor will stop if the brake lever is depressed even if you are still peddling the bicycle.

 The motor will stop when you stop peddling in this mode.

 This mode will give you a balanced "miles per charge" of battery power use among the

peddle assist modes.

2c. Peddle Assist Mode (High) –

 To put the bike in "High" peddle assist mode, switch on the bike as you would on the above

"LOW" mode and then press the green "Mode" button to light up the "HIGH" mode and

peddle the bicycle normally as you would any bicycle.

 In this mode, the motor will assist you with a high amount of power as you peddle the

bicycle.

 ! CAUTION: This mode is designed to achieve a speed of 20 MPH. User discretion is

advised

 The motor will stop if the brake lever is depressed even if you are still peddling the bicycle.

 The motor will stop when you stop peddling in this mode.

 This mode will give you a low "miles per charge" of battery power use among the peddle

assist modes.

3. Fully Electric Mode –

 Place the smaller top key in the switch and turn the key clockwise to turn on the electrical

system.

 Press the red "ON/OFF" button on the handlebar meter to turn "ON" the system.

 Place the "MODE" switch to the left of the handle bar in any position you desire, because

while engaging the thumb throttle, the peddle assist mode is in-active and does not have

any effect on the speed or power of the electric motor.

 Twist the thumb throttle in any increments of power you desire to power the motor of the

bicycle and it will take off.

 This mode can be used in conjunction with any of the above modes as the amount of motor

power supplied while twisting the thumb throttle overrides whatever mode the "MODE"

switch on the handle bar is engaged in.

 You can engage this mode whenever you want as long as the system is turned "ON".

 While peddling will lighten the load demand on the electric motor, you do NOT need to

peddle in this mode of operation.

 ! CAUTION: This mode is designed to achieve a speed of 20 MPH. User discretion is

advised

 The motor will NOT stop when you stop peddling while the thumb throttle is engaged.