Cytron RFBEE-433MHZ Посібник користувача - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління Cytron RFBEE-433MHZ. Cytron RFBEE-433MHZ 19 сторінок. Rfbee 433mhz wireless uart module

Друкувати сторінку

Return: "OK+U8O1"

9. AT+V

Inquire firmware version information of module

Example:

Send "AT+V" to module

Return: "HC-12_V1.1"

10. AT+SLEEP

After receiving the command, the module enters sleep mode after exiting from AT mode, and

this mode doesn't allow serial port data transmission. When the module enter AT mode

again, the module will exit from sleep mode automatically.

Example

Send "AT+SLEEP" to module when it's not needed to transmit data, to save power.

Return: "OK+SLEEP"

11. AT+DEFAULT

Set serial port baud rate, communication channel, and serial port transparent transmission

mode to default value.

Example

Send "AT+DEFAULT" to module

Returns: "OK+DEFAULT" and the default value is restored.

12. AT+UPDATE

Put the module in the status of waiting for software update.

After sending the command, the module will not respond to command anymore until it is

re-energized.

After serial port assistant sends this command,close the serial port,select file in HC11 updater

and open the serial port. Then the module can update software version.

ROBOT . HEAD to TOE

P roduct User's Manual –

R FBee-433MHz