Askey VIVO RTF7000 GPON Mini-ONT Посібник для початківців - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник для початківців для Модем Askey VIVO RTF7000 GPON Mini-ONT. Askey VIVO RTF7000 GPON Mini-ONT 10 сторінок.

Друкувати сторінку

RTF7000 GPON M

INI

QUICK SETUP

Step 1: Connect Fiber cable to GPON port of Mini-ONT

Danger — Fiber cables transmit invisible laser light. To avoid eye

damage or blindness, never look directly into fibers, connectors, or

adapters.

Warning — Be careful to maintain a bend radius of no less than 1.5 in.

(3.8 cm) when connecting the fiber optic cable. Too small of a bend

radius in the cable can result in damage to the optic fiber.

Step 2: Connect Ethernet cable (RJ-45) to GE port of Mini-ONT

Step 3: Connect power adapter to Mini-ONT and AC power

jack

Step 4: Turn on power switch, and check:

POWER LED should be steady ON (Green).If not, please

check the power cable is connected properly.

CONNECTION LED should be steady ON. If not, please

check the fiber cable is connected properly. If problem still

exists, please contact with local dealer.

ETH LED should be steady ON when Ethernet cable is

connected properly or blinking when RX/TX traffic is detected.

Check ALARM LED is OFF. If ALARM LED is ON, please

check fiber cable is connected properly. If the alarm still

existed, please contact with local agent.

Step 5: Wall mounting or free standing

-ONT - G

ETTING

TARTED

8 / 10

UIDE