Asko 1485 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Посудомийна машина Asko 1485. Asko 1485 2 сторінки. User manual use & care guide general fr (french version)
Також для Asko 1485: Інструкція з використання та догляду (12 сторінок), Посібник (13 сторінок), (іспанська) Uso y Cuidado (12 сторінок), (Французькою) Посібник з використання та експлуатації (12 сторінок)

Друкувати сторінку
Asko 1485 Посібник із швидкого старту
Q Q Q Q Q UICK ST
UICK ST
UICK ST
UICK STAR
UICK ST
1.
Load the dishwasher. (There's no need to pre-rinse. Simply scrape off large food particles before
you load the dishware.)
2.
After you've pushed the baskets back inside the unit, manually rotate the upper and lower spray
arms to be sure they turn freely.
3.
Make sure there is rinse aid in the dispenser. Add rinse aid, if needed.
4.
Add automatic dishwashing detergent and close the dispenser cover. (See "Amount of
Dishwashing Detergent to Use" below.)
5.
Close the door securely. (You should hear a click.)
6.
Press the touchpad for the desired program. The red indicator light for the program selected will
come on and the dishwasher will start.
LED
LED
LED
LED
LED WINDO
WINDO
WINDO
WINDOW DISPLA
WINDO
W DISPLAY Y Y Y Y S S S S S
W DISPLA
W DISPLA
W DISPLA
Program Time
Program Time
Program Time
Program Time
Program Time
When a program starts, the LED displays the time it took that program to run last time. As the program runs, the LED displays the
remaining time. If the time exceeds an hour, the display alternates between the hour and minutes remaining. The hour is designated
by an h (e.g., 1h).
The program times may not always be the same because of variations in the household hot water temperature. The dishwasher
heats the water to the proper temperature for the program selected, so if the temperature of the water entering your dishwasher is
too low, the dishwasher will run longer because it takes longer to heat the water. Raising your water heater setting could help to
shorten the cycle times. If this doesn't help, call the ASKO Advisory Center.
Fault Codes
Fault Codes
Fault Codes
Fault Codes
Fault Codes
The LED window displays three fault codes, as illustrated below.
Indicates a fault in the heater. Call your local
service technician.
Indicates high water level in the machine. Call the
ASKO Advisory Center.
AMOUNT OF DISHWASHING DETERGENT TO USE
AMOUNT OF DISHWASHING DETERGENT TO USE
AMOUNT OF DISHWASHING DETERGENT TO USE
AMOUNT OF DISHWASHING DETERGENT TO USE
AMOUNT OF DISHWASHING DETERGENT TO USE
We recommend that you use only unscented, granular automatic dishwashing detergent. Generally, one tablespoon of detergent is
needed for a normal wash load. More heavily soiled items, however, may need more detergent. Also, the amount of detergent
needed can vary due to differences in water hardness. The harder the water, the more detergent you may need. (See page 5.) In any
case, you should never use more than three tablespoons of detergent.
COMMONL
COMMONLY Y Y Y Y ASKED Q
COMMONL
ASKED Q
ASKED Q
ASKED QUESTIONS
COMMONL
COMMONL
ASKED Q
1)
Where do I put the prewash detergent?
2)
Where do I put the rinse aid?
3)
Why does my dishwasher run so long?
4)
How do I know when the dishwasher is done?
5)
Why do all of the lights stay on?
6)
Why are all of the lights flashing?
7)
Why am I getting a white film on my dishes?
8)
Why is there always water left in the bottom of my
machine?
AR
AR
T PR
T PR
OCEDURES
OCEDURES
ART PR
AR
T PR
T PROCEDURES
OCEDURES
OCEDURES
UESTIONS
UESTIONS
UESTIONS
UESTIONS
Indicates a thermistor fault (heater control). Call your
local service technician.
This simply means the door isn't closed completely.
ANSWERS
ANSWERS
ANSWERS
ANSWERS
ANSWERS
1)
It goes into the compartment between the main detergent
compartment and the rinse aid dispenser. (See page 4.)
2)
The rinse aid goes into the rinse aid dispenser. (See page 5.)
3)
If the temperature of the water entering your dishwasher is
below 120°, the dishwasher runs longer because it heats the
water to the proper temperature for the program selected.
Raising your water heater setting may help shorten the cycle
times. If this doesn't resolve the problem, call the ASKO
Advisory Center.
4)
See "Understanding the Indicator Lights" on the front of this
guide.
5)
See "Understanding the Indicator Lights" on the front of this
guide.
6)
See "Understanding the Indicator Lights" on the front of this
guide.
7)
You may be using too much detergent or washing your dishes
in water that is too hot. Try using less detergent and use the
Normal or Quick wash programs.
8)
It's normal to have some water left in the sump area near the
drain. If the water fills more than the drain area, see page 9 for
possible solutions.
Refer to this page in
the Use & Care Guide .
3, 4
3
5, 6
4, 5