OPERA
OPERATING INSTR
OPERA
TING INSTR
TING INSTRUCTIONS
TING INSTR
OPERA
OPERA
TING INSTR
THE CONTR
THE CONTR
THE CONTR
THE CONTR
THE CONTROL P
OL P
OL PANEL
OL P
OL P
Your ASKO dishwasher has a button-operated control panel, as illustrated below. To select a wash program or option,
simply press the appropriate button. After you have selected the desired wash program and options, press Start/
Power button (on the top side of the control panel)
PR
PR
OGRAMS
OGRAMS
PR
PROGRAMS
PR
OGRAMS
OGRAMS
To select a program, simply press the Program button until the indicator light behind the desired program glows. The
programs are described below:
Heavy Wash (160° F or 130° F)
For the heaviest soiled loads, such as pots, pans, casseroles, etc.
Normal Wash (130° F or 140° F)
For normally soiled loads, such as plates, glasses, bowls, and lightly
soiled pans.
Quick (85° F or 120° F)
For lightly soiled loads that are washed immediately after use. This
program is good for delicate items, such as fine china and crystal,
but you should set the temperature to low and dry the dishes without
heat.
Rinse and hold
To rinse dishes that you plan to wash later that day.
Program Times
The program times may not always be the same because of variations in the household hot water temperature. The
dishwasher heats the water to the proper temperature for the program selected; so if the temperature of the water
entering the dishwasher is too low, the dishwasher will run longer because it takes longer to heat the water. Raising
your water heater setting could help to shorten the cycle times.
OPTIONS
OPTIONS
OPTIONS
OPTIONS
OPTIONS
To select an option, simply press the appropriate option button. The options are described below.
Temperature
The dishwasher has two temperature options for each wash program, as shown above. When this button
is set on the high temperature, the main wash is heated to the higher temperature for the selected
program. If it is set to low, the main wash is heated to the lower temperature. The indicator light will glow
only when the high temperature is selected.
PO
PO
WER BUTT
WER BUTT
PO
POWER BUTT
PO
WER BUTTON
WER BUTT
Press this button to turn the main power to the unit on and off. Refer to the illustration above to see the
location of the power button.
ST
ST
AR
AR
T/ST
T/ST
OP BUTT
OP BUTT
ST
ST
STAR
AR
ART/ST
T/ST
T/STOP BUTT
OP BUTT
OP BUTTON
Once you have selected the wash program and temperature option, press this button to start the dishwasher. (Make
sure the door is securely closed.) The indicator light around the button will glow progressively as the program goes
through each cycle. When the program is complete, the lights will glow all the way around the button.
UCTIONS
UCTIONS
UCTIONS
UCTIONS
ANEL
ANEL
ANEL
ANEL
ON
ON
ON
ON
ON
ON
ON
ON
Program button
Program
indicator
lights
Temperature
Program progression
button
indicator lights
"The Normal Wash program is
used for energy testing and
should be used for normal or
lightly soiled loads. When
washing dishes that are more
heavily soiled, use a longer
program with higher
temperatures such as Heavy
Wash."
.
Stop
Start/Stop button
Page 7
Друкувати сторінку