Asko D3251 Інструкція з монтажу Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Посудомийна машина Asko D3251. Asko D3251 13 сторінок. User manual d3251 use & care guide fr (french ucg 2+1 warranty)
Також для Asko D3251: Інструкція з використання та догляду (16 сторінок), Посібник із швидкого старту (2 сторінок), Інструкція з використання та догляду (16 сторінок), (іспанська) Uso y Cuidado (16 сторінок), (Французькою) Мануель Д'ультізі (Manuel D'utilisation) (16 сторінок)

Asko D3251 Інструкція з монтажу Посібник з монтажу
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
Read these instructions carefully and completely before
you install the machine. The installation should be
carried out by a qualified person who is familiar with all
local codes and ordinances for electrical and plumbing
connections.
If a dishwasher is being installed in this area for the
first time, most of the cabinet work, plumbing, and
electrical has to be done before you move the machine
into place.
WHA
WHAT T T T T Y Y Y Y Y OU NEED
WHA
OU NEED
OU NEED
WHA
WHA
OU NEED
OU NEED
TOOLS
TOOLS
TOOLS
TOOLS
TOOLS
1)
Phillips No. 2 screwdriver
2)
Flat blade screwdriver
3)
Torx screwdriver size T 20
4)
Adjustable wrenches (if you use copper fittings)
5)
Open-ended wrench (1/2" [12 mm] or 5/8" [16 mm])
6)
Tape measure
7)
Spirit level
8)
Electric drill with 1" drill bit
9)
Keyhole saw
MATERIALS
MA
MA
TERIALS
TERIALS
TERIALS
MA
MA
TERIALS
Minimum 3/8" OD copper tubing of sufficient length
for your installation
Shut-off valve and fittings for water supply line
Tip Guards (optional)
Tip Guards (optional)
Tip Guards (optional)
Tip Guards (optional)
Tip Guards (optional)
When it is not possible to attach the
dishwasher to the cabinet or the
underside of the cabinet top, you
should install tip guards to prevent the
machine from tipping when you open
the door.
Refer to page 4 for installation
instructions.
TECHNICAL DA A A A A T T T T T A A A A A
TECHNICAL D
TECHNICAL D
TECHNICAL D
TECHNICAL D
Water pressure
18-176 psi
Power
120 V, 60 Hz, 15 amp.
Heating element
1200 W
Max loading
1300 W
Page 2
If you are replacing an old dishwasher, you must check
the plumbing connection and wiring before you move
the new dishwasher into place.
NOTE: Cosmetic damage must be reported to the
ASKO dealer within five days from the date of purchase.
As soon as you unpack the dishwasher, thoroughly
check it for cosmetic damage.
Tip Guards
(P/N 8070851)
The dishwasher is shipped with the high loop drain
hose, inlet hose and electrical cord attached and ready
to be connected.