Ambery LCDT6 Посібник з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з експлуатації для ТВ-тюнер Ambery LCDT6. Ambery LCDT6 16 сторінок. Super video to wxga converter external cable tv tuner

Друкувати сторінку

(1.) Set up cable connection when using a LCD/CRT monitor (In this section you will

see TV pictures after finishing the installation)

a. Connect the coaxial CATV cable from the wall into the RF input ("CABLE IN" port) in the back

panel of TV tuner module.

b. Connect the VGA cable from the VGA output( "MONITOR" port) in the back panel of TV tuner

module to your VGA monitor or LCD TV monitor.

c. Run the 3.5mm audio cable from your multimedia speaker or stereo system to the audio output

("SPEAKER" port) from the back panel of TV tuner module.

d. Connect the AC/DC power adapter of the TV tuner and power on the cable TV tuner module

using the supplied remote control or the push button on the module.

e. Set the TV tuner module at TV mode by pressing the "INPUT" button from the remote

controller or from the front control panel on the module unit itself. The "INPUT" button will

lead you to the desired video input channel from Coax(TV), Composite Video, S-Video

and PC VGA Pass Through. The video channel selection goes by a loop, i.e. CATV

CATV...

f. If the TV video screen is displayed on the CRT/LCD TV monitor or projector when you set the

TV tuner module at TV mode. Congratulation! You have finished the installation.

Speaker

CRT or LCD

*All brand names and trademarks stated or illustrated are related to their respect owners.

SET UP PROCEDURE

Rear

AC/DC

Adaptor