eGauge EG4 Series Посібник із швидкого старту - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Вимірювальні прилади eGauge EG4 Series. eGauge EG4 Series 12 сторінок.

Друкувати сторінку

Voltage Connection

1. Determine your electrical service type.
2. Connect your eGauge "N" terminal to
the neutral bus bar of the electrical panel
using NEC compliant conductors.
3. Connect L1, L2, and L3 (if applicable) to
a 15A breaker or fuse block using NEC
compliant conductors. Ensure each line
is connected to its respective voltage
phase in the panel.
It is very important
that L1, L2, and
L3 (if applicable)
are all connected
to independent
phases. Record
which phase is
connected to which voltage terminal pin in
the table provided.
4. See the last page of this guide for
additional phasing information.
4