Egcon AVR-125 Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Контролер Egcon AVR-125. Egcon AVR-125 7 сторінок. Automatic voltage regulator

6) Stop the engine and remove battery and push button.

7) Reconnect all wires.

8) Start engine and check the output voltage.

● ● ● ●

N OTE

To take flash exciting without engine running, keep the button on a pushed condition to

close the flash exciting circuit for 30sec.

7.2. AUTOMATIC FILED FLASH EXCITING

Whenever start generator set, to avoid no output voltage. It is recommended to take automatic

field flash exciting by using the generator control sequence as below drawing.

8. PARALLE OPERATION

AVR 125 are not designed for parallel operation ,but connecting a external variable resistance with a

toggle switch as below drawing, in series with one line of two input sensing lines to the regulator, the

the regulator can run in droop performance for inductive load.