Blueshape GRANITE TWO BV150 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для фотоапаратів Blueshape GRANITE TWO BV150. Blueshape GRANITE TWO BV150 16 сторінок. Professional broadcast v-lock camera batteries

Друкувати сторінку

GRANITE TWO battery series:

Presentation

This drawing is for reference only. The size of the real battery may vary depending on model.

Please see the next table for precise dimensions.

5-LED gauge (4x blue+1x RGB) and push button for capacity

check and Wi-Fi activation. The RGB LED indicates the Wi-Fi

activity status.

V-bracket for battery installation

D-TAP sockets 14.8V(nominal)/5A with overload protection*

D-TAP sockets 14.8V(nominal) without overload protection*

be used as alternative charging socket

Contact block. The pin-out sequence is:

Pack negative (+ve)



ID resistor



Data communication bus (clock)*



Data communication bus (data)*



Pack positive (-ve)



The output from this D-TAP socket should not exceed 70W. Above this

value, the D-TAP protection circuit intervenes, disconnecting the output

but without effecting the battery operation through the main terminals. The

power is automatically resumed by removing the overload condition from

the D-TAP. The total output power from the battery terminals and D-TAPs

should never exceed the nominal power of the model in use. Above this

value, the battery may go into main protection but will again resume

operation a few seconds after the overload condition has been removed.

- 4 -

can