ambiance OUTLANDER 19 Посібник - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник для Внутрішній камін ambiance OUTLANDER 19. ambiance OUTLANDER 19 7 сторінок.
Друкувати сторінку
MODEL: OUTLANDER 19
Optional Blower Kit Installation
Provisions have been made on this appliance to install an optional blower kit (EPT70) that comes complete with a variable speed
switch to turn blower ON/OFF, as well as to adjust the blower speed.
1. Ensure the thermal disc bracket is in
the correct postion (Fig. 5-1).
2. Remove the knock-out from the back
of the appliance.
3. Install the blower and housing
as shown (Fig. 5-2) using 4 screws
(supplied).
4. Loosen the adjustment screws.
5. Reach between the outer panel and
the fi rebox, then slide the thermal disc bracket until the thermal disc is touching the rear of the fi rebox. (Fig. 5-1).
note:
For optimal perfomance, the thermal disc MUST make contact with the fi rebox.
6. Re-secure the adjustement screws to hold the thermal disc bracket in place.
Ambiance® Fireplaces & Grills
EPT70
www.ambiancefi replaces.com
OUTLANDER
WOOD COLLECTION