Bluesound PULSE SUB Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Сабвуфер Bluesound PULSE SUB. Bluesound PULSE SUB 8 сторінок. Wireless
Також для Bluesound PULSE SUB: Посібник з швидкого налаштування (17 сторінок)
Друкувати сторінку
CROSSOVER FREQUENCY CONTROL : Adjusts the upper limit of the subwoofer's frequency range. Continuously
1
variable from 50Hz to 150Hz for precise matching of subwoofer bass reproduction with other speaker(s) in your system.
The default crossover frequency is set at 130 Hz, for use with the PULSE SOUNDBAR.
PHASE CONTROL : Selects the subwoofer output phase between in-phase (0˚) and out-of-phase (180˚) to compensate
2
for the low to mid bass acoustic effects of different placement locations and listening rooms. The default phase setting is
0˚. See "Subwoofer Placement" for more information.
POWER MODE SWITCH : Selects the power mode for the PULSE SUB. Select "ON" and Standby Mode is disabled; the
3
PULSE SUB is on all of the time. Select "AUTO" and the PULSE SUB will go to Standby Mode, automatically powering
up when required and returning to standby after 20 minutes of inactivity. Select "OFF" and the PULSE SUB will not
turn on. The default position for the power switch is AUTO.
VOLUME CONTROL : Adjusts the output level of the PULSE SUB only: This is not intended as a day-to-day volume
4
control. The default volume is set at level 7, for use with the PULSE SOUNDBAR .
INDICATOR LIGHT : Located on the front of the PULSE SUB. The light indicates power-on and wireless connectivity
5
status.
LOW/LINE LEVEL INPUT : For connecting the PULSE SUB to a separate component preamplifier, or to an integrated
6
amplifier or receiver with preamplifier-out/main-in connections, at line level.
LFE : For connecting the PULSE SUB to a separate component preamplifier, or to an integrated amplifier or receiver with
7
LFE/Subwoofer output connections. Not recommended for use with Bluesound Players.
LOW/LINE LEVEL OUTPUT : For connecting the PULSE SUB to a separate component preamplifier, or to an integrated
8
amplifier or receiver with preamplifier-out/main-in connections, at line level.
PAIRING BUTTON : To wirelessly pair the PULSE SUB with a PULSE SOUNDBAR or RT100, press and hold the pairing
9
button for 5 seconds, then release. The front indicator light will blink GREEN for approximately 6 seconds, indicating the
PULSE SUB is in pairing mode. The PULSE SUB will remain in pairing mode for approximately 60 seconds.
POWER SWITCH : The Power Switch turns off the subwoofer's internal amplifier.
10
AC MAINS INPUT : The PULSE SUB comes supplied with two separate AC power cords. Select the AC power cord
11
appropriate for your region. Before connecting the plug to the wall outlet, firmly connect the other end of the AC power
cord to the AC Mains input socket. Never force the plug into the wall outlet. An adapter may be necessary in certain
regions. Always disconnect the plug from the wall outlet first, before disconnecting the cable from the PULSE SUB's AC
Mains input socket.
3