Ambient F009RT/WT Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Метеостанція Ambient F009RT/WT. Ambient F009RT/WT 14 сторінок.

Note: Do not install the batteries backwards. You can permanently damage the

thermo-hygrometer. Do not use rechargeable batteries.

Note: We recommend installing Lithium AA batteries.

Reinsert the battery door into anemometer transmitter and push to tighten it.

The wind sensor LED indicator will light for 3 seconds, and then flash once per 16 seconds

thereafter. Each time it flashes, the sensor is transmitting data.

Note: If the wind sensor does not power up after inserting the batteries, press the reset button

shown in Figure.

4.3.2 Insert batteries into the rain gauge transmitter.

bucket, arrow direction as show in figure 5.

Locate the battery boor on the rain gauge transmitter, pull out the battery

compartment,

as show in Figure 6.

Figure 5

Bubble Level

Figure 6

Rotate and detach the upside