ACR Electronics RCL-50 Посібник з підтримки продукту - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з підтримки продукту для Прожектор ACR Electronics RCL-50. ACR Electronics RCL-50 20 сторінок. Remote control searchlight system
Також для ACR Electronics RCL-50: Посібник з підтримки продукту (19 сторінок), Посібник з підтримки продукту (20 сторінок)

Друкувати сторінку

The URC-102 Master Controller has the unique XRCiZ™ feature. The XRCiZ™ feature

routinely operates all moving parts in the searchlight to keep the motors and drive

mechanism freely running. Once activated, and every 30 days thereafter, the XRCiZ™

feature wakes up and operates the searchlight. The searchlight will rotate 360 in both

directions and the parabolic reflectors will move to the full up and down positions. This

feature keeps the searchlight in peak working order when not in service for long periods

of time.

To activate the XRCiZ™ feature, press and hold the Point Pad™ on/off button for

greater than 5 seconds. The green LED on the URC-102 Point Pad™ indicates that the

XRCiZ™ feature is enabled. While enabled, the XRCiZ™ feature can be started outside

of its 30-day cycle by pressing and holding the speed button on the Point Pad™ for

greater than 5 seconds.

While the XRCiZ™ feature is operating the searchlight, pressing any Point Pad™ button

will stop the current cycle and leave the searchlight to follow any additional commands.

To deactivate the XRCiZ™ feature, press and hold the Point Pad™ on/off button for

greater than 5 seconds. The red LED on the URC-102 Point Pad™ indicates that the

XRCiZ™ feature is disabled.

NOTE: LED feedback is not available when using RCL-100 or URC-101 Point Pads™.

NOTE: The searchlight should not be covered while the XRCiZ™ feature is enabled.

The URC-102 Master Controller provides optimum voltage to ensure the brightest

searchlight performance and long bulb life. Also to extend lamp life, the Master

Controller has a timed lamp power up feature. The searchlight lamp reaches full

intensity within 2 seconds.

The URC-102 Master Controller has a searchlight motor timeout feature. If a Point

Pad™ rotation switch (right or left) is continuously engaged for more than 50 seconds,

the Master Controller will interrupt the operation until the Point Pad™ switch is

disengaged. This feature will save the searchlight motor from burnout due to accidental

activation. The elevation motor has similar features which will timeout in approximately

20 seconds.

Y1-03-0141D