1010music Bitbox MK2 1.0 Посібник із швидкого старту
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Пробовідбірники 1010music Bitbox MK2 1.0. 1010music Bitbox MK2 1.0 2 сторінки.
Друкувати сторінку
This guide will give you a high-level introduction to bitbox mk2. To learn more of the details of how this module works, download the
user manual or watch tutorial videos from https://1010music.com/mk2docs. Find community, support, wish lists, and firmware updates
on our forum at
https://forum.1010music.com
Setup
1.
Insert the micro SD card into the
away from the screen.
2.
Turn off your Eurorack and use the ribbon cable to connect the module
to power:
•
Attach to the module with red edge of the ribbon cable on the left
side of the module when module is held with power socket on top
edge of module.
•
Attach to the Eurorack +12V power supply, with the red edge of the
cable aligned with pin 1 or the -12V pins on the power supply bus.
3.
Mount the module into the rack and then power it up.
After boot up, the bitbox mk2 displays the Pads screen with a grid of WAV
files loaded from one of the presets provided on the microSD card.
Inputs and Outputs
The following connections will get you started:
and
: To hear the module, use mini TS cables to connect to left and right channels of your mixer or speakers.
OUT1
OUT2
and
:
To record audio, use mini TS cables to connect to left and right audio signals.
IN1
IN2
:
To trigger a sample, use a mini TS cable to connect to a CV Gate source.
CV Triggers
:
To trigger pads or play them pitch shifted via MIDI, use a mini
MIDI
and B are both supported. Use the included MIDI adapter to connect to MIDI 5 PIN DIN.
Navigation
Control bitbox mk2 using the two black buttons, the four knobs, and the touchscreen. Push the
Pads and Menu screens. Push the
assign values. On the touch screen, you can use tap, pinch and stretch gestures to select items, trigger pads, push buttons, zoom in or
zoom out. Touch the tabs across the bottom of some screens to access more parameters.
Pads
When you push the
button, bitbox mk2 displays the Pads screen with the grid of 16 pads. Turn the lower right knob to swap
HOME
between the EXT display, the Velocity Slider and the Actions Menu along the right side of the screen. The top left corner displays the
clock in measure : beat format. The grid labels show you abbreviated names for the WAV files loaded into the pads. The pink pad is
selected. A blue bar at the bottom of the pad shows the play progress. A white bar here shows that a pad is armed and waiting for the
quantization break to start playing. Muted pads will have a red bar across the top.
Bitbox mk2 supports the following pad modes:
Icon
Pad Mode
Sample
Sample –
multi-sample
mode
Clip
Slicer
Granular
New Rec
New Multi
Page 1 of 2
1 May 2020
Bitbox MK2 1.0 Quick Start Guide
.
slot, with the notched edge
MICRO SD
button to view more detail about the selected element. Turn the knobs to select elements and
INFO
Description
Use to play single notes or drum hits.
Spread a folder full of wav files across the keyboard to get more
realistic instrument pitch shifting or to map different sounds to
each key on the keyboard.
Use for synchronized loops and quantized playback, e.g. drum
loops and guitar tracks.
Use with a WAV file with different sections that you want to trigger
independently.
Generate new sounds from your samples. The sample is played
back in small portions about 10 to 200ms in length, called grains.
Use to start recording a new WAV file or clear a WAV from a pad.
Use to start recording a new set of WAVs for use in multi-sampling.
cable to connect to a MIDI controller. TRS A
TRS
button to cycle between the
HOME
Reverse
Beat
Playback
Synch
Copyright 1010music LLC 2020
Set Loop
Play
Points
Slices