Ambient Weather WS-0270 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Термометр Ambient Weather WS-0270. Ambient Weather WS-0270 10 сторінок. Wireless indoor / outdoor thermometer with indoor humidity
Друкувати сторінку
2.4 Display Console Set Up
1. Move the remote thermometer(s) about 5 to 10' away from the display console (if the sensor
is too close, it may not be received by the display console).
2. Remove the battery door on the back of the display, as shown in Figure 2. Insert one AA
(alkaline or lithium, avoid rechargeable) battery in the back of the display console.
All of the LCD segments will light up for a few seconds to verify all segments are operating properly.
3. Replace the battery door, and fold out the desk stand and place the console in the upright
position.
The console will instantly display indoor temperature and humidity.
temperature will update on the display within a few minutes.
While in the search mode, the reception search icon
If the remote does not update, please reference the troubleshooting guide in Section 7.
Version 1.2
©Copyright 2018, Ambient LLC. All Rights Reserved.
Figure 2
1
Suspension eye for wall hanging
2
Desk Stand
3
°C / °F button
4
High / Low Record button
5
Battery Compartment
6
Battery Compartment door
The remote
flash.
Page 3