Ambient Weather WS-04 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Термометр Ambient Weather WS-04. Ambient Weather WS-04 7 сторінок. Wireless indoor / outdoor thermometer
Друкувати сторінку
2.4 Sensor Operation Verification
Verify the indoor and outdoor temperature match closely with the console and the remote thermometer
in the same location (about 5' apart). The sensors should be within 4°F (the accuracy is ± 2°F).
Allow about 30 minutes for both sensors to stabilize.
3. Remote Sensor Installation
It is recommended you mount the remote sensor on a north facing wall, in a shaded area. Direct
sunlight and radiant heat sources will result in inaccurate temperature readings. Although the sensor is
water resistant, it is best to mount in a well protected area, such as an eve.
Use a screw or nail (not included) to affix the remote sensor to the wall, as shown in Figure 3.
Version 1.0
Figure 2
Figure 3
©Copyright 2011, Ambient LLC. All Rights Reserved.
Page 3