Ambient Weather WS-09 Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Термометр Ambient Weather WS-09. Ambient Weather WS-09 15 сторінок. 8-channel wireless refrigerator/freezer thermometer
Друкувати сторінку
Problem
Wireless remote (probe thermometer) not
reporting in to console.
There are dashes (--.-) on the display
console.
Temperature sensor reads too high in the
day time.
Indoor and Outdoor Temperature do not
agree
Display console contrast is weak
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Solution
If any of the sensor communication is lost, dashes (--.-)
will be displayed on the screen. To reacquire the signal,
press and hold the CHANNEL/+ button for 3 seconds,
and the remote search icon
displayed. Once the signal is reacquired, the remote
search icon
will turn off, and the current values
will be displayed.
The maximum line of sight communication range is 300'
and 100' under most conditions. Move the sensor
assembly closer to the display console.
If the sensor assembly is too close (less than 5'), move
the sensor assembly away from the display console.
Make sure the remote sensor LCD display is working
and the transmitter light is flashing once per 60 seconds.
Install a fresh set of batteries in the remote probe
thermometer. For cold weather environments, install
lithium batteries.
Make sure the remote sensors are not transmitting
through solid metal (acts as an RF shield), or earth
barrier (down a hill).
Move the display console around electrical noise
generating devices, such as computers, TVs and other
wireless transmitters or receivers.
Move the remote sensor to a higher location. Move the
remote sensor to a closer location.
Make sure the probe thermometer is mounted in a shaded
area on the north facing wall. Consider the following
radiation shield if this is not possible:
http://www.ambientweather.com/amwesrpatean.html
Allow up to one hour for the sensors to stabilize due to
signal filtering. The indoor and outdoor temperature
sensors should agree within 2 °F (the sensor accuracy is
± 1 °F).
Use the calibration feature to match the indoor and
outdoor temperature to a known source.
Replace console batteries with a fresh set of batteries.
will be constantly
Page 13