Ambient Weather WS-70 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Термометр Ambient Weather WS-70. Ambient Weather WS-70 14 сторінок. Wireless indoor/outdoor 8-channel thermo-hygrometer with jumbo display
Друкувати сторінку1. Remove the battery door on the back of the sensor by removing the set screw, as shown in
Figure 1 .
2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the
transmitter.
Figure 2 displays all four switches in the OFF position (factory default setting).
3. Channel Number: The WS-70 supports up to eight transmitters. To set each channel number
(the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Table 1.
4. Temperature Units of Measure: To change the transmitter display units of measure (°F
vs. °C), change Dip Switch 4, as referenced in Table 1.
Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
Figure 1
Figure 2
Page 3