Asko CCT9051S Інструкція з використання Посібник з використання - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з використання Посібник з використання для Вентиляційна витяжка Asko CCT9051S. Asko CCT9051S 16 сторінок.
Друкувати сторінку
Operation
Pairing the remote
This remote control must be paired to the cooker hood before first use.
1. Start up the appliance (power on). The hood will start in 'pairing mode for 5 minutes.
2. Activate the Remote pairing mode by holding 'c and 'w for 3 sec.
3. During pairing all the indicators on the hood and remote will blink. All indicators will turn off when
the connection is established.
If the connection is not established repeat the entire pairing process.
NOTE!
Remote control will go into standby after 30 seconds. The remote will wake up when it is picked
up or detects movement.
Switching extraction on and off
1. Press and hold the 'Fan key on the remote for 1 second.
The cooker hood will switch on at the lowest setting.
2. Press the '+ key again for a higher fan setting. Press and hold the '+ key for 1 second to select
the highest setting (boost).
3. Press the '- key to select a lower setting.
The extraction setting is indicated by the speed level indicators on the hood.
4. To switch off the cooker hood, press and hold the 'Fan key for 1 second.
NOTE!
Lighting and motor key must be pressed for at least 1 second. This is to prevent the functions
from being accidentally switched on or off.
6