Ambirad Apollo QH 15-1 Інструкція з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Обігрівач Ambirad Apollo QH 15-1. Ambirad Apollo QH 15-1 20 сторінок. Quartz glow instant infra-red heaters
Друкувати сторінку
Typical multiple heater assembly
2.4
Titan range:
2.4.1 Titan Static heater
The support stand for the Titan Static heater is
supplied in two halves for ease of packing.
1. Place the base half stand 'A' on the work
surface.
2. Remove both self tapping screws 'D' from
the inside of each leg.
3. Slide the top half of the stand 'B' into
position to fit inside of the base half stand.
4. Replace the self tapping screw 'D' and fully
tighten.
5. Remove the 2 bolts and washers 'C' from
the back of the heater.
6. Place the heater against the top half of the
stand and replace the 2 screws and washers
'C' ensuring they pass through the fixing
bracket and fully tighten.
2.4.2 Titan Mobile heater
The support stand for the Titan Static heater is
supplied in two halves for ease of packing.
1. Interlock the two base plates with the base
anchor plate uppermost.
2. Affix the casters to each of the four ends.
3. Join the support to the anchor plate and bolt
trough the base pieces.
4. Affix the head anchor bracket to the top of
the support.
5. Attach the heater head to the top of the
support.