Ambirad Apollo QHL 45-3 Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Обігрівач Ambirad Apollo QHL 45-3. Ambirad Apollo QHL 45-3 20 сторінок. Quartz glow instant infra-red heaters
Друкувати сторінку
Introduction.
Welcome to the range of high frequency
infra-rad heaters. Local regulations may vary in
the country of use and it is the installers
responsibility to ensure that such regulations
are satisfied
All installation, assembly, commissioning and
service procedures must be carried out by
suitable qualified competent persons to the
statutory regulations in the country of use.
When installing, commissioning and servicing is
undertaken on these heaters due care and
attention is required to ensure that working at
Document Index.
1 Installation Requirements
1.1 Health & Safety
1.2 Model Definitions
1.3 Mounting the unit
1.3.2 Sorrento range
1.3.2.1 General
1.3.2.2 Single units SOR15/DL30/TW45
1.3.2.3 Two SOR 15/DL30/TW45 units
1.3.2.4 Three SOR 15/DL30 units
1.4 Electrical Connections
1.4.1 General
1.4.3 Sorrento range
1.5 Technical details
2 Assembly Instructions
2.1 Tools Required
2.2 Apollo range
2.3 Sorrento range
3 Servicing Instructions
3.1 Tools Required
3.2 Maintenance
4 Replacing Parts
4.1 Replacing the lamp - general
4.2 Apollo range
4.3 Sorrento range
4.4 Titan range
height regulations are adhered to at the
mounting heights specified.
All Dimensions shown are in mm unless
PLEASE READ this document prior to
installation and use. The safety of this
heater is guaranteed only by the correct usage
in accordance with these instructions, therefore
it is recommended that they are retained for
future reference.
The manufacturer reserves the right to alter
specifications without prior notice.