Floe V2602 LENGTH BUNKS Montageanleitung Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Bootsausrüstung Floe V2602 LENGTH BUNKS herunter. Floe V2602 LENGTH BUNKS 8 Seiten.
Seite drucken
INSERT UPRIGHT TUBES INTO CLAMP WELDMENTS AND ATTACH USING (2) ½" NUTS, HAND TIGHT
ONLY (FIGURE 1.3). ADJUST HEIGHT AND TORQUE TO 70 FT-LBS (FIGURE 1.4).
FIGURE 1.3
2X
FIGURE 1.4
2X
NOTE:
BUNK/CRADLE PAD DISCLAIMER
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY RECOMMEND
UPRIGHTS MAY HAVE TO BE CUT TO
ALLOW FULL TRAVEL OF CRADLE ONCE
THAT YOU CONSULT WITH YOUR BOAT'S MANUFACTURER TO INSURE THAT YOUR ARE
SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY POTENTIAL DAMAGE.
FINAL PLACEMENT IS ESTABLISHED.
SHEET 4 OF 8