Floe V2602 LENGTH BUNKS 조립 지침 매뉴얼 - 페이지 4
{카테고리_이름} Floe V2602 LENGTH BUNKS에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Floe V2602 LENGTH BUNKS 8 페이지.
페이지 인쇄
INSERT UPRIGHT TUBES INTO CLAMP WELDMENTS AND ATTACH USING (2) ½" NUTS, HAND TIGHT
ONLY (FIGURE 1.3). ADJUST HEIGHT AND TORQUE TO 70 FT-LBS (FIGURE 1.4).
FIGURE 1.3
2X
FIGURE 1.4
2X
NOTE:
BUNK/CRADLE PAD DISCLAIMER
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY RECOMMEND
UPRIGHTS MAY HAVE TO BE CUT TO
ALLOW FULL TRAVEL OF CRADLE ONCE
THAT YOU CONSULT WITH YOUR BOAT'S MANUFACTURER TO INSURE THAT YOUR ARE
SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY POTENTIAL DAMAGE.
FINAL PLACEMENT IS ESTABLISHED.
SHEET 4 OF 8