Floe VSD 5000 Bedienungsanleitung für die Montage - Seite 8

Blättern Sie online oder laden Sie pdf Bedienungsanleitung für die Montage für Zelt Floe VSD 5000 herunter. Floe VSD 5000 12 Seiten. Pontoon guide-in/bunk
Auch für Floe VSD 5000: Anleitung zur Montage (4 seiten), Montageanleitung Handbuch (8 seiten), Montageanleitung Handbuch (8 seiten), Montageanleitung Handbuch (12 seiten)

Floe VSD 5000 Bedienungsanleitung für die Montage
FOLLOW THESE GUIDELINES FOR USING AND LOCATING THE PONTOON BUNKS (FIGURE 2.5A & 2.5B).
-THE WIDTH OF THE BUNKS SHOULD BE 1-2 INCHES LESS THAN THE DISTANCE BETWEEN THE
PONTOONS.
-TO SET BUNK HEIGHT, MEASURE FROM THE BOTTOM OF THE PONTOON DECK TO THE BOTTOM OF
THE PONTOON, THEN ADD 1" TO THAT MEASUREMENT.
-THE REAR OF A 21 FOOT PONTOON BOAT SHOULD OVERHANG PAST THE LIFT BY 3 FEET. FOR EVERY
ADDITIONAL FOOT IN LENGTH OF THE BOAT, IT SHOULD OVERHANG BY AN ADDITIONAL 6 INCHES
BEYOND THE REAR OF THE LIFT.
THESE ARE THE GENERAL GUIDELINES THAT CAN BE ADJUSTED FOR AN INDIVIDUAL'S
CIRCUMSTANCES.
ONCE FINAL POSITION IS SET, TORQUE 3/8" NUTS ON CLAMPS TO 35 FT-LBS (FIGURE 2.6).
FIGURE
2.5A
UPRIGHTS MAY HAVE TO BE CUT TO
ALLOW FULL TRAVEL OF CRADLE ONCE
FINAL PLACEMENT IS ESTABLISHED.
NOTE:
SHEET 8 OF 12