Amcot LRC-LNS Handbuch für Betrieb und Wartung - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Zubehör Amcot LRC-LNS herunter. Amcot LRC-LNS 9 Seiten. Cross flow cooling tower
Seite drucken
identical air volume is achieved, resulting in lower operating costs with identical
performance.
2.3 INTERNAL SPACE
The internal structure of your LRC tower is designed to provide maximum working space for
repairs and maintenance. A sturdy platform, secured to the frame of the tower is provided for
your maintenance team. CAUTION: Due to slimes and algae that may build up the walkway
can become slippery. Take Precautions and where proper work boots.
2.4 Fan
The fan of your tower is designed to provide sufficient airflow at lower fan motor RPM and
operate at a lower decibel level.
2.5 Fill Materials
Fill material is made of PVC stiff sheets, which are formed by vacuum molding, differing
from standard materials used. This material has been tested both in laboratories and
applications, to perfection, enabling maximum water surface exposure, allowing for
maximum heat transfer.
2.6 Distribution System
LRC towers utilize gravity flow to distribute water evenly over fill material. Hot water
entering the tower is dispersed into a distribution pan located on top of the cooling tower next
to louvers. The hot water drops through the distribution pans that have predrilled and
predetermined hole placement to ensure that water is covering the entire fill media. This form
of distribution helps reduce pump size, friction loss, psi requirements, while providing even
distribution. The distribution plate within the pan helps slow water flow so that the heat
transfer can begin immediately.
3.
INSTALLATION
3.1 CAUTIONS FOR INSTALLATIONS
A. Pick a location in which airflow is steady and free of structures, which may lower
efficiency.
B. Location should be relatively free of dust, acids, and other material, which could build up
in your tower and lower efficiency or damage the unit.
C. Keep the tower away from heat sources because these units raise the surrounding air
temperature, which will affect your cooling tower's efficiency. (If this cannot be
avoided, an atmosphere temperature should be taken and provided to the factory for
recalculation).
D. Provide enough space for piping.
E.
Be sure to keep the tower vertical when lifting or mounting to foundation. Once on
foundation, anchor bolts and legs of tower should be fastened tightly.
F.
The design of the cooling tower is to pull air through the air inlets (louver sides). Be sure
that proper space is provided between the tower and an obstacle if structure free areas are
not allowable. SEE TABLE BELOW
AMCOT COOLING TOWER CORPORATION OPERATIONS AND MAINTAINENCE MANUAL IS
OWNED BY LIANG CHI (USA) CORPORATION. THE NAME "AMCOT" AND AMCOT PRODUCT
LOGO ARE TRADEMARKS AND ANY REPRODUCTION WITHOUT WRITTEN CONSENT WILL
BE A VIOLATION OF LAW AND SUBJECT TO LEGAL ACTIONS. ALL RIGHTS RESERVED, 1998.