Amcrest AMC4KBC36P-W Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera Amcrest AMC4KBC36P-W herunter. Amcrest AMC4KBC36P-W 9 Seiten. 4k analog hdcvi bullet camera

Seite drucken

Most Amcrest DVRs will require you to set the camera to HD-CVI or Analog (960H) settings and may not be

compatible with HD-TVI or AHD. Ensure your 4-in-1 camera's toggle switch is set to the proper setting as indicated

in the diagram below.

Note: If the proper mode configuration is not set, you will not be able to view your camera on your DVR. Please

make sure you have the proper settings on your camera before you begin setting up or installing.

To install your Amcrest 4-in-1 camera, please follow the steps provided below:

Note: Make sure you have the proper mode configuration on your camera before running or connecting any

cables. Refer to the Figure 1-1 for more details on how to set mode configurations for your specific DVR.

Step 1: Connect a BNC (coaxial) cable to the video out connection of your camera.

Step 2: Connect the male end of the DC power connector of the BNC (coaxial) cable to the female end of the

power connector of the camera.

Step 3: Connect the BNC (coaxial) cable to a video out channel on the back of your DVR.

Step 4: Connect the male end of the DC power connector of the power adapter to the female end of the power

connector of the BNC (coaxial) cable. Plug in the power adapter to apply power to the camera.

Technical Specifications

Model

Camera

Image Sensor

Effective Pixels

Scanning System

Electronic Shutter Speed

Minimum Illumination

S/N Ratio

Figure 1-1

AMC4KBC36P-W

1/2" CMOS (OS08A10)

3840(H)×2160(V), 8MP

Progressive

PAL: 1/4s~1/100,000s NTSC: 1/3s~1/100,000s

0.054Lux/F1.6, 30IRE, 0Lux IR on

More than 65dB