AME 11015 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Werkzeuge AME 11015 herunter. AME 11015 6 Seiten. Titan tire bead breaker

Seite drucken

! WARNING !

To avoid serious personal in-

jury, always wear proper pro-

tective gear, such as hard

hats, safety glasses, gloves,

and steel toe shoes when us-

ing hydraulic equipment.

Failure to chock the wheels

and crib the vehicle can re-

sult in Serious injury or

death. Always deflate tires

before removing a wheel, a

rim, or part of a rim clamp or

nut. If you do not deflate the

tire, the tire could explode,

causing serious injury of

death. Always stand to one

side of the rim when using

the bead breaker. Standing to

one side of the bead breaker

allows you to maintain con-

trol of the bead breaker. If it

is not seated properly and

flies off the rim, the bead

breaker could cause serious

injury or death.

AME INTERNATIONAL

INSTRUCTION MANUAL

Save these instructions

For your safety, read, understand, and follow the information provides

with and on this product. The owner and operator shall have an under-

standing of this product and safe operating procedures before attempt-

ing to use. Instructions and safety information shall be conveyed in the

operator's native language before use of this jack is authorized. Make

certain that the operator thoroughly understands the inherent dangers

associated with the use and misuse of the product. If any doubt exists

as to the safe and proper use of this product, remove from service im-

mediately.

Inspect before each use.

cracked, damaged or missing parts (including labels) are noted. The

owner and operator shall be aware that use and repair of this product

may require special skill and knowledge. It is recommended that an an-

nual inspection be done by qualified personnel. Labels and Operator's

manuals are available from manufacturer.

PRODUCT DESCRIPTION

The 11015 Hydraulic Bead Breaker is designed to work on most rims 1,

2 and 3 piece wheels. It is expressly intended to be used as an aid in

breaking the bead seal between a tire and it's one piece wheel for the

purpose of resealing bead seal, replacement of tire or wheel, replacing

tire valve, tire tube etc. Bead breaker works directly on the bead of the

tire and will not damage the tire if used correctly.

- 2 -

Do not use if broken, bent,