Canon 3150C002AA Service-Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Service-Handbuch für Drucker Canon 3150C002AA herunter. Canon 3150C002AA 25 Seiten.

VII.

Servicing Notes

A. Installation Space Requirements

The performance of this scanner is affected by the environment in which it is

installed. Maintain sufficient space around this machine during operation and

maintenance, and to allow ventilation. The rear panel has a power cord and

ventilation holes, therefore do not press it against a wall. Ensure that there is

a clear path for bringing in the packaged machine and that the necessary

tools (trolley, etc.) are available.

Table 4 - Installation Space Requirements

Note: The weight of the main body is approximately 55 lbs. When taking the

main body out or moving it, two (2) persons must hold it from both sides. Use

a cart, etc. when moving it. When taking out the main body, lift the center

with no pad with one hand, then support the rear side with the other hand

because the center of gravity of the main body is at the

B. Estimated Installation Time

The estimated length of time needed to unpack and install the machine is

approximately 30 minutes. This estimated installation time is based on one (1)

experienced technician or end-user.

Excluded in the estimated installation times are the following:

• Installation space preparation

• Unit configuration

Refer to the user manual or setup guide for details

imageFORMULA DR-G2140 / DR-G2110 Service Guide

imageFORMULA DR-G2140/DR-G2110 Service Guide

October 2018

Page 9