Aktakom ATK-2040 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Aktakom ATK-2040 herunter. Aktakom ATK-2040 10 Seiten. Ac/dc trms watt clamp meter

Seite drucken

WARNING: Make sure that all the test leads are disconnected from the meter's terminals for current measurement.

1. DC Current

a. Set the rotary switch at 400A DC.

b. Push the zero button to adjust the reading to zero.

c. Press the trigger to open the jaw and fully enclose the conductor to be measured. No air gap is allowed between

the two half jaws.

d. Read the measured value from the LCD display.

2. AC Current

a. Set the rotary switch at 400A AC

b. Press the trigger to open the jaw and fully enclose the conductor to be measured. No air gap is allowed between

the two half jaws.

c. Read the measured value from the LCD display.

B. DC/AC Voltage Measurements

WARNING: Maximum input for DC V is 600, and for AC V is 600. Do not attempt to take any voltage

measurement that exceeds the limits. Exceeding the limits could cause electrical shock and damage to the

clamp meter.