BOBPERRY AUDIO Ducker Pro 2 Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Monitor BOBPERRY AUDIO Ducker Pro 2 herunter. BOBPERRY AUDIO Ducker Pro 2 18 Seiten.

Bob Perry Ducker Pro 2 – Manual – Page 10/18

ONE SHOT

Enables the special "One shot mode". In this mode, Ducker Pro 2 will duck only once with

each Attack, Hold/Hysteresis and Release period. It will only restart to listen to the Aux signal

once the previous Release period is over.

Use this mode for Effects like Pumping Beats. If for example your Side-Chain Signal (i.e.

Bass Drum) variates in duration, the Bass Drum length won't extend the Ducking period when

One Shot mode is enabled.

Pro Tip: You can use the One Shot mode to effectively act as a tremolo effect if you set the

threshold to a very low value, thus always re-triggering the Ducker after each Release period.

S/C ATTACK, MAIN RELEASE

When your AUX SRC is set to MAIN ATTACK, S/C RELEASE, this toggle switch allows you to

reverse

OUTPUT GAIN + Output Meter

Adjusts the plug-in's output level. Although the plug-in itself won't distort even with very high

signal levels, we recommend setting a value that won't saturate the output meter on the right

of the OUTPUT GAIN dial.

Undo

and Redo

Buttons

Click the undo button to quickly revert to the plug-ins state before you last changed a

parameter.

Once you have undone something, the Redo button will come alive. Click the Redo button to

get back to the plug-in's state before you clicked undo.

You can undo + redo multiple steps.

Note: If you undo something, and then change a parameter manually, you won't be able to

redo.

VST is a software and trademark of Steinberg Media Technologies GmbH.

20210113160816