BobsCNC E3 Handbuch zur Fehlersuche - Seite 14
Blättern Sie online oder laden Sie pdf Handbuch zur Fehlersuche für Graveur BobsCNC E3 herunter. BobsCNC E3 16 Seiten. Cnc router engraver bearing and rail dust kit
Auch für BobsCNC E3: Handbuch (8 seiten), Schnellstart-Handbuch (3 seiten)
Seite drucken
- 1. Table of Contents
- 2. My Stepper Motors Are Running Backward
- 3. My Z Axis Is Not Homing Correctly
- 4. My E3 will Not Home Correctly (Diagnosing Home Switches)
- 5. My Firmware Does Not Seem to be Working
- 6. I Tried to Use Easel, Now My Machine Does Not Work Correctly
- 7. I Get and Error When I Run a G-Code File Made with F-Engrave
- 8. My Z Stepper Motor Wobbles Excessively
- 9. My Machine Seems to be Skipping some Commands
- 10. What Are the Alarm Code Descriptions
- 11. How Do I Change My Current Setting on the Stepper Motor Drivers
- 11. Setting the Current on the A4899 Stepper Motor Driver with a Volt Meter
- 11. Setting the Current on the A4899 Stepper Motor Driver Without a Volt Meter
- 12. The Dewalt Motor Shaft Came out During Assembly. (Dewalt Brush Remove and Replace)
Insert on screw to hold the shaft inplace.
Insert the motor brushes and place the brush spring as shown for both motor brushes.