Canon AE-1 Handbuch für Installationsverfahren - Seite 31
Blättern Sie online oder laden Sie pdf Handbuch für Installationsverfahren für Digitalkamera Canon AE-1 herunter. Canon AE-1 48 Seiten.
Auch für Canon AE-1: Erste Schritte (2 seiten), Anleitung Handbuch (22 seiten), Handbuch (42 seiten), Handbuch (12 seiten), Anleitung Handbuch (22 seiten)
Seite drucken
3.2
Making Adjustments
3) From the back of the front cover, remove the fixing
screw, and detach the spanners [I].
3.2.1
Adjusting the HeightITilt
A
If the difference in height between the puncher unit
and the host machine or the tilt is not as indicated,
make adjustments as follows; be sure to adjust the
height before adjusting the tilt:
Preparing for Adjustment
A
In the case of the Finisher-AEl, you may need to
remove the auxiliary ring and the rear foot cover of
the finisher before adjusting the height; be sure to
remove the auxiliary ring without disconnecting the
finisher from its host machine to prevent the finish-
er from tumbling over.
<Finisher-AE 1 >
1) If the height at the rear must be corrected, remove
the auxiliary ring and the leR rear foot cover.
Remove the four screws [I], and detach the auxilia-
ry ring [2]. Remove the screw [3], and detach the
leR rear foot cover [4].
<Saddle Finisher-AE2>
1) Open the front cover; then, from the back of the
front cover, remove the fixing screw, and detach the
spanners [I].
2) Remove the three screws, and detach the front cov-
er. (Skip this step if it has already been removed.)