Canon AE-1 Руководство по процедурам установки - Страница 31

Просмотреть онлайн или скачать pdf Руководство по процедурам установки для Цифровая камера Canon AE-1. Canon AE-1 48 страниц.
Также для Canon AE-1: Начало работы (2 страниц), Руководство по эксплуатации (22 страниц), Руководство (42 страниц), Руководство (12 страниц), Руководство по эксплуатации (22 страниц)

3.2

Making Adjustments

3) From the back of the front cover, remove the fixing

screw, and detach the spanners [I].

3.2.1

Adjusting the HeightITilt

If the difference in height between the puncher unit

and the host machine or the tilt is not as indicated,

make adjustments as follows; be sure to adjust the

height before adjusting the tilt:

Preparing for Adjustment

In the case of the Finisher-AEl, you may need to

remove the auxiliary ring and the rear foot cover of

the finisher before adjusting the height; be sure to

remove the auxiliary ring without disconnecting the

finisher from its host machine to prevent the finish-

er from tumbling over.

<Finisher-AE 1 >

1) If the height at the rear must be corrected, remove

the auxiliary ring and the leR rear foot cover.

Remove the four screws [I], and detach the auxilia-

ry ring [2]. Remove the screw [3], and detach the

leR rear foot cover [4].

1) Open the front cover; then, from the back of the

front cover, remove the fixing screw, and detach the

spanners [I].

2) Remove the three screws, and detach the front cov-

er. (Skip this step if it has already been removed.)