Euro-Pro EP922HA Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Dampfreiniger Euro-Pro EP922HA herunter. Euro-Pro EP922HA 8 Seiten. 40 oz. steam cleaner 120v., 60 hz, 1550 watts
OPERATING INSTRUCTIONS
Care & Maintenance of the Steam
Pocket Towel
Due to the unique cleaning ability of this
cloth, proper care of your micro-fiber towel
is required to ensure long life and continued
cleaning ability.
• The first thing you should do when
you get a new micro-fiber towel is to
wash and dry it. During the manufacturing
process the fabric has a tendency to
become flat as it picks up contaminants
from the air and machinery. There will
also be a number of loose threads that,
while they cause no harm, can be
annoying the first time you use the towel.
• To clean the towel, simply wash it in your
washing machine using the warm water
setting.
• Always wash your towels separately from
other fabrics. They have a tendency to
pick up lint and other particles from other
fabrics and the next time you use your
towel, this lint will transfer to the surface
being cleaned.
• ONLY USE LIQUID DETERGENTS,
never use dry detergents as many times
the granules do not fully dissolve and
become trapped in the towel. This can
scratch the surface that you are cleaning.
• NEVER USE BLEACH OR FABRIC
SOFTENERS! Bleach will damage the
micro-fiber fabric and fabric softeners
deposit a coating on the micro-fiber fabric
that will not allow the cloth to clean
efficiently.
• Air dry the towel. Do not put in a clothes
dryer as high heat will cause the towel to
shrink and the micro-fibers to break down.
• If you wash your towels on a regular basis
and don't let them get too dirty, they will
last much longer. As with any fabric, dirt
particles, grease and other contaminants
can cause the fibers to break down,
therefore regular cleaning will help
preserve your micro-fiber towels.
• As you use the micro-fiber towel, you will
notice that sometimes a thread will loosen
or pull out. This is normal and you should
NEVER PULL AT THE LOOSE
THREAD! Pulling the thread can cause
the weave to come undone. Instead,
simply trim the thread with a pair of sharp
scissors.
CAUTION:
Be aware of hand placement
and take care not to actuate the steam
discharge switch while installing or
removing accessories.
Attaching the Accessories to the
Flexible Steam Hose
NOTE:
Allow the unit to cool for 5 minutes
before changing accessories.
Window Squeegee
This attachment is very useful for
cleaning large windows, plastic material,
ceramic, tiled or marble surfaces.
To use: Connect the tile
squeegee to the hand
grip or use with
extension tube for
hard to reach surfaces.
Apply steam abundantly, rub with the
soft spongy edge, then remove excess
water and dirt with the glass wiping
edge.
IMPORTANT:
When cleaning
windows, always avoid any sudden
changes in temperature to prevent glass
breakage or cracks.
Concentrator
Attach the concentrator
to the handgrip or to the
extension tubes. Then
attach the detail brushes
to the concentrator.
Detail Brush
It is best for cleaning grout in-between
the tiles, ceramic and marble.
To use: Attach the detail
brush on to the end of the
concentrator, which
then may be used directly
on the hand grip or with extension tubes
Micro-Fiber Towel
It is best for cleaning up
after using the steam
accessories. Lifting the
dirt away from the surface.
To clean: Follow the cleaning
instructions for the steam pocket.
8
OPERATING INSTRUCTIONS
Attaching the Shoulder Strap
Using the detachable shoulder strap
allows for greater freedom of movement
when both hands are needed for
various cleaning tasks.
To attach the shoulder strap to the
steam cleaner, simply snap the
shoulder strap hooks onto the
connecting rings on the unit body.
See Fig. 1, 2 & 3.
Connection
Points
Fig. 1
Fig. 2
Fig. 3
IMPORTANT: When using the
steam cleaner with the shoulder
strap, avoid rocking or tilting the
unit excessively as this may
cause water to enter the hose
and be discharged along with the
steam.
Attaching the Casters to the
Steam Cleaner
The casters for the steam cleaner are
packed and shipped unassembled. To
assemble the casters to the steam
cleaner, simply snap the casters onto
the pegs that are in the base of the
unit. (Fig. 4) Repeat for the next three
(3) casters.
Fig. 4
After you have inserted the castors to
the base of the steam cleaner, turn the
unit right side up on a flat, level
surface.
IMPORTANT: Always insert the
casters before you fill the unit.
5