Euro-Pro EP922HA Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Steam Cleaner Euro-Pro EP922HA. Euro-Pro EP922HA 8 pages. 40 oz. steam cleaner 120v., 60 hz, 1550 watts

Print Page

1. Technical Specifications

OPERATING INSTRUCTIONS

Care & Maintenance of the Steam

Pocket Towel

Due to the unique cleaning ability of this

cloth, proper care of your micro-fiber towel

is required to ensure long life and continued

cleaning ability.

• The first thing you should do when

you get a new micro-fiber towel is to

wash and dry it. During the manufacturing

process the fabric has a tendency to

become flat as it picks up contaminants

from the air and machinery. There will

also be a number of loose threads that,

while they cause no harm, can be

annoying the first time you use the towel.

• To clean the towel, simply wash it in your

washing machine using the warm water

setting.

• Always wash your towels separately from

other fabrics. They have a tendency to

pick up lint and other particles from other

fabrics and the next time you use your

towel, this lint will transfer to the surface

being cleaned.

• ONLY USE LIQUID DETERGENTS,

never use dry detergents as many times

the granules do not fully dissolve and

become trapped in the towel. This can

scratch the surface that you are cleaning.

• NEVER USE BLEACH OR FABRIC

SOFTENERS! Bleach will damage the

micro-fiber fabric and fabric softeners

deposit a coating on the micro-fiber fabric

that will not allow the cloth to clean

efficiently.

• Air dry the towel. Do not put in a clothes

dryer as high heat will cause the towel to

shrink and the micro-fibers to break down.

• If you wash your towels on a regular basis

and don't let them get too dirty, they will

last much longer. As with any fabric, dirt

particles, grease and other contaminants

can cause the fibers to break down,

therefore regular cleaning will help

preserve your micro-fiber towels.

• As you use the micro-fiber towel, you will

notice that sometimes a thread will loosen

or pull out. This is normal and you should

NEVER PULL AT THE LOOSE

THREAD! Pulling the thread can cause

the weave to come undone. Instead,

simply trim the thread with a pair of sharp

scissors.

CAUTION:

Be aware of hand placement

and take care not to actuate the steam

discharge switch while installing or

removing accessories.

Attaching the Accessories to the

Flexible Steam Hose

NOTE:

Allow the unit to cool for 5 minutes

before changing accessories.

Window Squeegee

This attachment is very useful for

cleaning large windows, plastic material,

ceramic, tiled or marble surfaces.

To use: Connect the tile

squeegee to the hand

grip or use with

extension tube for

hard to reach surfaces.

Apply steam abundantly, rub with the

soft spongy edge, then remove excess

water and dirt with the glass wiping

edge.

IMPORTANT:

When cleaning

windows, always avoid any sudden

changes in temperature to prevent glass

breakage or cracks.

Concentrator

Attach the concentrator

to the handgrip or to the

extension tubes. Then

attach the detail brushes

to the concentrator.

Detail Brush

It is best for cleaning grout in-between

the tiles, ceramic and marble.

To use: Attach the detail

brush on to the end of the

concentrator, which

then may be used directly

on the hand grip or with extension tubes

Micro-Fiber Towel

It is best for cleaning up

after using the steam

accessories. Lifting the

dirt away from the surface.

To clean: Follow the cleaning

instructions for the steam pocket.

OPERATING INSTRUCTIONS

Attaching the Shoulder Strap

Using the detachable shoulder strap

allows for greater freedom of movement

when both hands are needed for

various cleaning tasks.

To attach the shoulder strap to the

steam cleaner, simply snap the

shoulder strap hooks onto the

connecting rings on the unit body.

See Fig. 1, 2 & 3.

Connection

Points

Fig. 1

Fig. 2

Fig. 3

IMPORTANT: When using the

steam cleaner with the shoulder

strap, avoid rocking or tilting the

unit excessively as this may

cause water to enter the hose

and be discharged along with the

steam.

Attaching the Casters to the

Steam Cleaner

The casters for the steam cleaner are

packed and shipped unassembled. To

assemble the casters to the steam

cleaner, simply snap the casters onto

the pegs that are in the base of the

unit. (Fig. 4) Repeat for the next three

(3) casters.

Fig. 4

After you have inserted the castors to

the base of the steam cleaner, turn the

unit right side up on a flat, level

surface.

IMPORTANT: Always insert the

casters before you fill the unit.