American Standard Portsmouth 9210.030 Montage-/Installationsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Montage-/Installationsanleitung für Inneneinrichtung American Standard Portsmouth 9210.030 herunter. American Standard Portsmouth 9210.030 14 Seiten. 30" vanity

Seite drucken

ASSEMBLY & INSTALLATION INSTRUCTIONS

Portsmouth

Vanity Top

7820.400 & 7820.800

Fits most 30" x 21" Vanity Bases

Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To help insure that the

installation process will proceed smoothly, please read these instructions carefully before you begin. Also, review the recommended tools and

materials list; carefully unpack and examine your new plumbing fixture.

Recommended Tools & Materials

Roughing-in Dimensions

(203mm)

(102mm)

FINISHED

WALL OR

BACKSPLASH

1-3/4"

DIA.

(791mm)

1-3/4"

(44mm)

11-1/4"

(286mm)

SUPPLIES

13-3/4"

AS REQ'D

(349mm)

1-1/4" O.D. TAILPIECE

33-1/2"

(851mm)

FINISHED FLOOR

If inspection of this AS America, Inc. ("American Standard") plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship,

American Standard will repair or, at its option, exchange the product for a similar model.

This limited warranty applies only to the original purchaser and installation of these products. In the event of a limited warranty claim, proof of purchase will be required—save

sales receipt.

This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a local

building or plumbing contractor to insure local code compliance

before installation.

This limited warranty is void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other

damages; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped by

American Standard.

American Standard's option to repair or exchange the product under this limited warranty does not cover any labor or other costs of removal or installation. IN NO EVENT WILL

AMERICAN STANDARD BE LIABLE FOR THE COST OF REPAIR OR REPLACEMENT OF ANY INSTALLATION MATERIALS, INCLUDING BUT NOT LIMITED TO, TILES,

MARBLE, ETC. American Standard will not be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a

defective product, all of which are expressly excluded from this limited warranty. This limited warranty does not cover any liability for consequential or incidental damages, all of

which are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including those of merchantability or

fitness for an intended purpose. (Some states or provinces do not allow the exclusion or limitation of implied limited warranties, so this exclusion may not apply to you.)

This limited warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this limited

warranty does not affect such statutory rights.

In the United States:

American Standard Brands

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of Consumer Affairs

For residents of the United States, warranty information may also be

obtained by calling the following toll free number: (800) 442-1902

www.americanstandard.com

Product names li ste d h e re in a re t ra d e ma r k s o f AS Amer i cas Inc.

Basin Wrench

Adjustable Wrench

7820.800

MODEL

7820.400

MODEL

4-1/2"

(114mm)

10-1/8"

(257mm)

22"

(559mm)

22-7/8"

(581mm)

31-1/8"

(203mm)

1-1/4"

O.D. WASTE

SUGGESTED

DIMENSIONS

AS AMERICA, INC. ONE YEAR LIMITED WARRANTY

Tubing Cutter

Channel Locks

Putty Knife

Pipe Wrench

Vanity Installation

Two people recommended for this

installation

Mount the drain assembly (not included) on

the sink. Be certain to apply a bead of

sealing putty on the underside of the drain

(Part "A") in order to ensure a watertight seal

between the sink and drain. Remove excess

putty after installing the drain on the sink.

Apply a bead of silicone adhesive to the rim

of the vanity. Place the top centered left to

right on the vanity and with the back edge of

the top even with the rear of the vanity. Apply

a bead of silicone along the top back edge of

the vanity top and the wall. Clean up any

excess silicone.

Connect the trap to the drain assembly hand

tight to check alignment. It may be necessary

to cut off part of the tailpiece (area "B") or part

horizontal leg of the trap (area "C").

Connect hot and cold supply lines to the shut

off valves. Tighten trap joints for watertight

assembly.

CARE AND CLEANING

When cleaning your vanity top, wash it with mild, soapy water, rinse

thoroughly with clear water and dry with a soft cloth. Avoid abrasive

detergents, disinfectants, or cleaning products in aerosol cans.

In Canada:

AS Canada ULC

5900 Avebury Rd.

Mississauga, Ontario

Canada L5R 3M3

Toll Free: (800) 387-0369

www.americanstandard.ca

Plumbers' Putty

Level

Silicone Caulk

Tape Measure

In Mexico:

American Standard B&K Mexico

S. de R.L. de C.V.

Via Morelos #330

Col. Santa Clara

Ecatepec 55540 Edo. Mexico

Toll Free: 01-800-839-1200

www.americanstandard.com.mx

73 0 8 3 7 - 1 0 0 R e v. B