American Standard Portsmouth 9210.030 Інструкція зі збирання/встановлення - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція зі збирання/встановлення для Внутрішнє оздоблення приміщень American Standard Portsmouth 9210.030. American Standard Portsmouth 9210.030 14 сторінок. 30" vanity
Друкувати сторінку
ASSEMBLY & INSTALLATION INSTRUCTIONS
®
Portsmouth
Vanity Top
7820.400 & 7820.800
Fits most 30" x 21" Vanity Bases
Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To help insure that the
installation process will proceed smoothly, please read these instructions carefully before you begin. Also, review the recommended tools and
materials list; carefully unpack and examine your new plumbing fixture.
Recommended Tools & Materials
Roughing-in Dimensions
(203mm)
(102mm)
FINISHED
WALL OR
BACKSPLASH
1-3/4"
DIA.
(791mm)
1-3/4"
(44mm)
*
11-1/4"
(286mm)
SUPPLIES
*
13-3/4"
AS REQ'D
(349mm)
1-1/4" O.D. TAILPIECE
*
33-1/2"
(851mm)
FINISHED FLOOR
If inspection of this AS America, Inc. ("American Standard") plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship,
American Standard will repair or, at its option, exchange the product for a similar model.
This limited warranty applies only to the original purchaser and installation of these products. In the event of a limited warranty claim, proof of purchase will be required—save
sales receipt.
This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a local
building or plumbing contractor to insure local code compliance
before installation.
This limited warranty is void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other
damages; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped by
American Standard.
American Standard's option to repair or exchange the product under this limited warranty does not cover any labor or other costs of removal or installation. IN NO EVENT WILL
AMERICAN STANDARD BE LIABLE FOR THE COST OF REPAIR OR REPLACEMENT OF ANY INSTALLATION MATERIALS, INCLUDING BUT NOT LIMITED TO, TILES,
MARBLE, ETC. American Standard will not be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a
defective product, all of which are expressly excluded from this limited warranty. This limited warranty does not cover any liability for consequential or incidental damages, all of
which are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including those of merchantability or
fitness for an intended purpose. (Some states or provinces do not allow the exclusion or limitation of implied limited warranties, so this exclusion may not apply to you.)
This limited warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this limited
warranty does not affect such statutory rights.
In the United States:
American Standard Brands
P.O. Box 6820
Piscataway, New Jersey 08855
Attention: Director of Consumer Affairs
For residents of the United States, warranty information may also be
obtained by calling the following toll free number: (800) 442-1902
www.americanstandard.com
Product names li ste d h e re in a re t ra d e ma r k s o f AS Amer i cas Inc.
© AS A mer i cas Inc . 2 012
Basin Wrench
Adjustable Wrench
8"
7820.800
MODEL
4"
7820.400
MODEL
4-1/2"
(114mm)
10-1/8"
(257mm)
22"
(559mm)
22-7/8"
(581mm)
31-1/8"
8"
(203mm)
8"
(203mm)
1-1/4"
O.D. WASTE
*
SUGGESTED
DIMENSIONS
AS AMERICA, INC. ONE YEAR LIMITED WARRANTY
Tubing Cutter
Channel Locks
Putty Knife
Pipe Wrench
Vanity Installation
Two people recommended for this
installation
Mount the drain assembly (not included) on
the sink. Be certain to apply a bead of
sealing putty on the underside of the drain
(Part "A") in order to ensure a watertight seal
between the sink and drain. Remove excess
putty after installing the drain on the sink.
Apply a bead of silicone adhesive to the rim
of the vanity. Place the top centered left to
right on the vanity and with the back edge of
the top even with the rear of the vanity. Apply
a bead of silicone along the top back edge of
the vanity top and the wall. Clean up any
excess silicone.
Connect the trap to the drain assembly hand
tight to check alignment. It may be necessary
to cut off part of the tailpiece (area "B") or part
horizontal leg of the trap (area "C").
Connect hot and cold supply lines to the shut
off valves. Tighten trap joints for watertight
assembly.
CARE AND CLEANING
When cleaning your vanity top, wash it with mild, soapy water, rinse
thoroughly with clear water and dry with a soft cloth. Avoid abrasive
detergents, disinfectants, or cleaning products in aerosol cans.
In Canada:
AS Canada ULC
5900 Avebury Rd.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: (800) 387-0369
www.americanstandard.ca
Plumbers' Putty
Level
Silicone Caulk
Tape Measure
A
C
B
In Mexico:
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 01-800-839-1200
www.americanstandard.com.mx
73 0 8 3 7 - 1 0 0 R e v. B