Da-Lite Model C Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Projektionsfläche Da-Lite Model C herunter. Da-Lite Model C 4 Seiten.

To Open Screen

Pull down on pull bail until desired picture area is obtained. Lock

into position as on a window shade. Be sure surface is locked

before releasing.

To Re-Roll Your Picture Surface

The Model C operates on the same principle as a window shade.

Pull down about 4 inches to disengage the locking dog and start

the fabric up firmly and quickly.

Large picture surfaces are heavy and will start up too slowly to

prevent the locking dog from catching unless help is provided,

so keep picture surface moving briskly.

Should the locking dog catch, pull the picture surface down

about 4 inches and start the surface up rapidly.

However, do not permit the picture surface to roll up

uncontrolled, particularly the last few feet. Allowing the bottom

slat to strike the case uncontrolled may result in severe damage

to your screen. Use the cord provided for control.

To view an online Model C retraction tutorial, please visit http://

www.da-lite.com/products/manual-screens/model-c and click on

the Video tab..

Protect Your Screen

Before re-rolling surface into case, examine both front and back

of surface to be sure they are free of foreign matter.

To Use With A Portable Floor Stand

NOTE: Can only be used if ordered as a Floor Model C. Wall

screens will not operate correctly.

1. Assemble stand according to Floor Stand instructions.

2. Lay screen in cradle of stand with pull bail up.

3. Lift surface by pull bail and hook pull bail over gooseneck of

elevating support.

4. Raise upper handle of elevating support until it locks in top

position.

5. Raise lower handle of elevating support until full picture area

is obtained and locked in position. No stretching, no straining.

6. Stand may be placed on table if extra height is needed.

Model C

Floor Stand