Canon Color imageCLASS MF8050Cn Starter-Handbuch - Seite 17
Blättern Sie online oder laden Sie pdf Starter-Handbuch für Alles in einem Drucker Canon Color imageCLASS MF8050Cn herunter. Canon Color imageCLASS MF8050Cn 29 Seiten. Colour laser multifunction
Auch für Canon Color imageCLASS MF8050Cn: Starter-Handbuch (33 seiten), Spezifikationen (2 seiten)
Seite drucken
1
2
Preface
Installing the Machine
Selecting a Method for Connecting the
Machine To a Computer
There are two ways to connect the machine to a computer: Network connection and USB connection, so select the
connection type according to your environment or function.
*
The functions of USB connection and network connection can be used simultaneously.
•
For Network Connection
Network Connection and Configuration
P. 15
Network Connection and Configuration
1.
Connect the LAN cable.
2.
The machine sets the IP address
automatically.
Wait approximately 2 minutes.
If you want to set the IP address manually, see the following.
e-Manual "Setting IPv4 Address"
e-Manual "Setting IPv6 Address"
3
Configuring and Connecting the Fax
Connect the cable.
Make sure that the
green indicator of
the LAN port is on.
4
Connecting to a Computer and
Installing the Drivers
•
For USB Connection
Installing with USB Connection
About the LAN cable
•
The machine does not come with a LAN cable or a hub.
Have cables or a hub ready as needed.
•
Use a Category 5 or higher twisted pair cable for the
LAN.
About obtaining IP address automatically
<DHCP> or <Auto IP> (Bonjour) is enabled in the default setting.
So, the IP address can be obtained automatically when not setting IP address
manually.
•
<DHCP> setting is prioritized over <Auto IP>.
•
If using the machine in Bonjour environment, the IP address can be obtained automatically
without the dedicated device (such as a DHCP server) necessary for the auto settings of IP
address.
If the IP address of the machine is changed
When the machine and computer are on the same subnet, the
connection is maintained.
Appendix
P. 18
If the indicator is not turned on
Check the following.
•
Whether the machine and hub are
connected using a USB cable
•
Whether the power of the machine is
turned ON
15